Właśnie się uczę. Nie mogę zaprogramować nowego kluczyka lub czy jest na to jakiś inny sposób

Attached Files

Thumbnail(s)
   

I just changed option 312 Lane Change Assist to level 1, but I have no clue what it does?

Does it change lane when you turn on the flashers during cruise control/pilot assist??

hi, anyone can connect to Volvo vida and update my car via remote desktop?

2021 xc60 polestar engineered 

After many many issues (because I was using a virtual machine via a Mac) and Power6 stepping in at all hours of the night and morning. I actually had to load a 27inch monitor and full atx chassis into my car for him to recuse me from a BRICKED car (again, my fault not Orbit) I’ve set my speed limit to 190 (hit 157 today on a track) and updating my wheels due to 21’s for winter and 22’s for summer. I was in tinkering mode.. as I’ve already accomplished what I got orbit for. 

Enter 109 “adaptive (and bending via another config #)  I now have fully operating ACTIVE HIGH BEAMS. 

Was just driving in a lot of traffic, and after almost a 20 minute drive with my active highbeams on most of the time, nobody flashed me not once, and I saw how they lit up part of the road and part of the other road was not lit just adjusted as it needed based on oncoming traffic. It seems vehicle speed is also part of the algorithm.

When the engine is not running, the speed icon in the turn glows green as soon as the engine is started, a yellow triangle appears, which means this icon, how to remove it from the screen using orBit

Attached Files

Thumbnail(s)
   

Hello everyone,

I have a problem, the circle has been turning for a few weeks. But I don't know why. nothing is displayed. I also can't update the maps via USB.
I've also done restore to OEM with Orbit, but the circle spins for no apparent reason.
I also can't load the Spotify update or it isn't displayed. Do you know what that could be?

the map installation is grayed out.

Thank you very much.







Gesendet von iPhone mit Tapatalk

Is there a way to enable the moonroof to open/close from the key together with the windows?

My Ford Fusion 2014 had this option. While holding the lock button on the key it closed all windows and sunroof. While holding the unlock button it opened all windows and the sunroof opened for ventilation.

My friend's European XC90 2016 works the same way. If he has the moonroof open, he can just hold the lock button and it will close.

On my US XC90 2018, the same action only closes windows, but the moonroof remains open.

Is there an option in OrBit to change this?

Is it possible to delete egr with Orbit ?

Hi all, new to the forum and to OrBit. Should have my PINs very soon I hope so I can get some of that sweet Pixel active matrix headlight action on my Polestar 2! I have the cable, but I only have one laptop now, and all my machines run some form of Linux or FreeBSD. My only Windows machines are a gaming rig in my home office on the other side of the house from my garage, and one that my grandson uses in the upstairs guest room - maybe someday I'll repurpose that one to be a shop PC.

But I thought I'd try something crazy and fired up my Windows 10 virtual machine on my laptop and sure enough, OrBit was able to control the USB-attached ethernet connection via a virtual network NAT connection (default on QEMU/KVM) and it worked like a charm. Was able to pull codes, get the LV battery voltage, the SoH on the HV battery (93% after 3+ years and 30K+ miles!). Great news for me, no need to build a 150ft network cable.

So if anyone needs to try this, just thought I'd throw it out there.

I’m about to take the plunge and purchase your software for my brand 2024 V 60 Recharge. Taking delivery in Sweden mid-May. Really cool service!

My first big project will be to add the factory retractable tow hitch and its module. That is a big challenge in the US since the parts aren’t available here; however, I will be in Sweden and intend to purchase parts and bring them back with me.

Getting the module programmed is my biggest challenge/concern. Reading all of the related forum threads did not seem to clearly address this issue, though I saw in one that you mentioned you might have a solution for software or programming resources for this module.

Do you have any suggestions on how I might get that done since Volvo VIDA will not authorize my car in the US to install that accessory. Do I need to source a used module, or can you suggest resources to program a new one?

Best,
Jay