v0.3.5 has been released to update the ECUs that may no respond during programming and can be safely ignored

Updates

• GSM module added to list of ECUs that don't respond to all programming checks
  
• The additional module added will prevent annoyance of "All ECUs not ready" when flashing/programming.
  

• List of ECUs known not to respond to all programming checks moved to AppSettings config
  
• GSM added to the list
  

Is this thing sufficient? For a 2022.5 V60 Recharge polestar. Or is there a 'better' one?
https://www.amazon.com/OCHIKI-Ethernet-V...B0BL7KD8X2

Attached Files

Thumbnail(s)
   

v0.3.4 has been released to enable additional ECUs for flashing (other than CEM)

HCML and HCMR modules enabled for flashing, and OrBit has been updated to allow more modules to be added as they are tested.

• HCML and HCMR are now allowed for flashing on the ECU Tools tab (user provides the SBL and software VBFs to flash to modules)
  

• OrBit updated to refer to configuration files for allowed modules to flash, to enable updating via config files in the future
  
• HCML and HCMR added to the list of modules that OrBit allows to flash
  
• All modules continue to be enabled to allow attemtping to "backup" from the ECU.
  

Does anyone here have workshop manuals for the 2022 volvo xc90 b5?


Regards,
Marian


Sent from my iPhone using Tapatalk

v0.3.3 has been released to address an issue for "iCup" Android based cars with VGM Firewall

Some functions fail due to previous releases removing VGM frewall disable:

• ABS Clear Config (ECU reset)
  
• Hard ECU reset on some ECUs
  
• Clear DTC on some ECUs fail when VGM firewall not disabled
  

• Add VGM unlock and firewall disable process to DTC Clear and Hard ECU Reset process functions
  

There are two settings to get it work. 

036  ADJUSTABLE SPEED LIMITER      03 ASL & AVSL

149  ROAD SIGN INFORMATION   > Select the one with with Speed Limit Adaption (SLA) based on your country. 

This will give you speed limiter option in cruse control settings on the dash and there will be button on SENSUN. If the button on SENSUS is enabled, the speed limiter will be updated according to road signs. If not enabled driver can set any top limit manually.  

There is also setting SPEED WARNING. > do not enable this for US / CAN.  Enabling it breaks the actual over speed driver warning in SENSUS. 0 or +5 miles /hour.

Hey all, I created some diagnostics forums as more diagnostic stuff is added to OrBit.

Once thing I am looking at, is the "battery replacement" process, which is supposed to essentially reset the "learning" of the capcity and charging behavior of the battery. I have the process, it will be added to OrBit.

What the "battery replacement" does in actuality, is simply reset the "State of Charge" and the "Time in Service" of the battery.

You can already read this data in OrBit, so I've been looking at my car:

   

On my car, the battery "time in service" is 0 days today, and yesterday it was 2 days. I expected that the data would reflect the actual age of the battery (original to my car since 2019). But it doesn't seem to. I do a lot of things on my car though...not clear the battery life, but lots of other testing ;-) It makes me wonder the value of resetting the "battery time in service" if it is getting reset anyways. I will still add it, as it's a function that VIDA does and is supposed to be needed.

But still I am curious..any other OrBit users want to check this on your car, see what your battery time in service reports??

This is a quick release as I start adding some more diagnostics and service functions.

This should be the first update that folks will get notified the new version is available (since update notifications added in 0.3.1)

"Operation Mode" is added now. The interesting/useful parts of this are:
If a car has gone into "Crash" mode, OrBit can reset it to "Normal"
"Dyno" mode can now be set on the car, for dynamometer testing

Changes:

• Add "operation mode" read and setting. When connected to the car the current mode will show on a button
  
• Clicking the button for operation mode brings up a dialog to choose and set the operation mode
  
• Existing service mode for the EPB has been condensed into a single button to be consistent as more service functions are added
  

Hello All,
Would someone be able to share with me the readout of their Volvo with Android system 2022+, you can remove the VIN or any info in there.
Usually you can get it from VIDA


Thank you

Example:
   

Guys,
 if I click on "e brake service mode" does that release the rear brake cylinders and can I change the brake pads?