0.9.2 is released. Some new things are added and other features are released out of beta.
NOTE: Sorry for the delay, there were a couple late additions that were really needed, which extended the time to get them done, while anyone waiting for key programming release was hanging on that...

(Latest version of OrBit can always be downloaded here: https://app.spaycetech.com/orbitupdate/download)

New features:

• Air Suspension Calibration is now general release, for all licensed cars equipped. Calibrate, and "trim" (lower and raise default height) in one easy dialog with OrBit.
  
• Key programming is released, and available for all licensed cars. The CEM "Security PIN" is required to be entered to program keys, or see next item about extract.
  
• CEM Security PIN Extraction is added to support key programming. This is integrated with key programming, OrBit will offer to extract the security PIN to enable the ability to program keys. Not all CEMs are supported. Older CEMs generally not, most newer (2019+) CEMs are, and some newer CEMs are in "experimental" status. OrBit will recognize the CEM and report if it is supported for extracting the security PIN. I will post some guides soon, but intially OrBit fairly well guides you through what you need to program keys. Just connect to your car, and click the "Program Keys" button on the Service tab.
  
• CMA PHEV models are supported. These FWD PHEV models with single High Voltage Contactor(HVC) were not previously compatible with OrBit safety checks on the HVCs when programming. This support has been added.
  

• Major improvements made to speed in reading data from the car. Connecting to the car, updating display info, and time to read DID data have been improved significantly. 
  
• ABS config clear has been revamped, for all variants but specifically to address intermittent issues on cars with "vacuumless" brake system (BCM2). Some cars were not completing this step successfully every time and left with DTC history causing error messages. This has been resolved.
  
• Updates to Air Suspension Calibration based on testing and feedback before release. OrBit now stores calibration info and shows actual suspension detected height even when "trimmed" to aid in measurement. Safety limit is added, OrBit won't let you calibrate outside of the same factory allowances as VIDA.
  
• Updates to Parking Camera Calibration to match specs from VIDA for monitoring and guidance on the process.
  
• Tweaks have been made to the "ECU Checks" when programming, to reduce the instances of "Flash Failed" due to ECUs not responding, when the situation is not very critical.
  
• PIN Finder has been updated to resolve an issue of incorrect reported PINs on particularly troublesome capture files, i.e. bad connection quality with dropped packets.
  
• Various small bug fixes and changes for improved reliability of OrBit
  

I installed an electric towbar but the towbar opening button is not lit, how can I fix this or is there more detailed instructions on how to activate the towbar block TRM

I installed an electric towbar but the towbar opening button is not lit, how can I fix this or is there more detailed instructions on how to activate the towbar block (TRM)

orbit software start fail,how to do

Attached Files

Thumbnail(s)
   

Can i change my subscription to Software 1yr with license for flashing 1 VIN, WITH CEM PIN retreival for 1 VIN: $225,i have already buy OrBit Software 1yr with license for flashing 1 VIN: $100,but it need cem pin,i don't know how to get the PIN, so i can't use orbit software until now.

I'm currently eyeing a T8 Inscription 2019, and it seems that most V60's in Finland are equipped with power seats but lack the memory function. I'm keen to add this feature and could use some advice from the community on what's required for this modification.

Here are a few questions I have:

What components are necessary to add memory function to the power seats? I've come across the part number "30644884" associated with the control module that includes memory function. I did not find a cross reference to this parts so i'm not sure if basic electric seat have this module already. I've also found part numbers "31489630" and "31489631" for buttons on the driver and passenger doors. Are these the correct buttons needed for activating and using the memory function once installed?

Is a new wiring harness necessary for this modification, or can the existing wiring accommodate the addition of the memory function?

Does the memory function integrated into the control module also retain information for adjusting the side mirrors, or is an additional component needed for this purpose?

In terms of software configuration, what specific options or settings need to be adjusted or enabled? My plan is to utilize Orbit software to unlock the memory seat feature.


31489630
31489630

Anyone know what "085 Central Lock, Type" does? There are two options "01 Without blocked lock mode" and "02 Blocked lock mode" (with my US spec car set to 01)

I'm wondering if this is related to the "double lock" function available in some geographies?

Does anyone know if Volvo’s are generally fitted as standard with heater elements in the steering wheel? Or would this be a specific addition for higher spec models or those including a “winter package” for example. 

I have a 2019 XC60 Momentum (limited spec) for which I have activated the heated steering wheel option through Orbit. That has enabled an additional control in the central panel, piggy-backed on the driver’s heated seat control, that allows me to select the heated steering wheel from level 1 to 3. Unfortunately, I get no temperature change at the steering wheel. So should I conclude that my car simply doesn’t heating element in the steering wheel? Or are there other factors that affect when it would heat up? Like outside/inside ambient temperature? Or whether heated seats and/or front/rear screen heaters are switch on?

Bottom line: should I be able to get this working with my model? Or would I need a replacement steering wheel that actually heats? Would Orbit be able detect if the necessary support is there?

Thanks

Hi,
First of all - thank´s for a great forum and even greater product of all i read!

I am wanting to retrofit full leather, electric and memory seats with all other bits in a full leather interior to our V60cc that only have cloth seats (I live in Sweden). What i am uncetan of is if it is possible to get the memory function to work, the legrest to finction in the Sensus menu so my question is - 

Do anyone know if there is option to change values for memory seats, fully electric seats and so on in Orbit?

I have ordered a cable and is planing to buy/order the program to start install H/K or B&W soundsystem first.

Thanks!

In my 2019 XC90 I was getting frequent CarPlay disconnects so I took a chance and ordered a new dual USB C hub, got it installed and changed 362 USB CONNECTION from "03 With USB Hub, type A" to "05 With USB hub, Type C". Wired CarPlay immediately worked great but threw DTC for IHU: U3002 - Vehicle Identification Number - Algorithm Based Failures - Signal compare failure. Also, none of my wireless CarPlay dongles work. I've cleared DTCs, reset ECUs, and left it locked overnight but still having same issue & DTC. Any idea if this DTC is due to not having software in the new USB C hub or something else? I'll have access to a new model loaner tomorrow 11/14 if there's a way to use it & VIDA if necessary or would I be better off buying a used USB C hub or USB A? I saw the thread where we can flash software if that's also a possibility. I had it in for service for the disconnect error, and of course they could not duplicate. Thanks in advance!