So I went and switched the windshield and the post calibration identified the B&W as a mismatch with the car config.

So I returned to the shop with the original HP amplifier added but I was lazy and didn’t connect the speakers.

So still the post calibration of the radar and the driver support something was degraded. Of cause it seems the driver alert alarm needs the dashboard speaker, I’m thinking

Will now connect the speakers to the amplifier and hope this will let the radar / driver support calibration finalize!?

Edit: Yes before going to the shop the car was reverted to OEM.

Hi
where can i buy orbit software for volvoxc60 2020 ?
best regards
Ulf

Hi,

My main laptop that's on Windows 11 doesn't have an ethernet port.

I also have an older laptop on Windows 7 that has an ethernet port, will OrBit work?

Thanks

Hi

So I have added like the B&W hardware , so after a OEM restore before going to the shop. After that visit is the intention I use Config Preset and Orbit will auto detect the B&W amp and update the car to match the hardware?

New features:

• New Config Presets added for options for Tow Bar, TPMS, Cruise Control/Pilot Assist. OrBit reads car information and chooses the "best" settings based on Volvo configs for PA equipped cars with the same equipment.
  
• PIN Finder Replaces the old "PIN From log" tool. PIN Finder will find and crack all interesting PINs from the same inputs (VIDA log or wireshark capture). In addition to CEM and VGM PINs, PIN Finder will crack other unique PINs found and display all PINs found in a report format.
  

• Park Camera (360 cam) Learning and Calibration  - Starting Calibration or Learning for the Parking cameras, monitor status real time while driving to confirm calibration state
  
• Brake Service for "Vacuumless" brake system - Enable Bleed mode, run Bleed check and Leakage check tests, enable EPB service mode for pad replacement.
  
• Air Suspension Calibration - Prepare, measure and calibrate 4 corner air suspension. "Raise" or "Lower" option included to customize the calibrated height of the suspension.
  
• Key fob programming -  Add or delete key fobs from cars with "keyless" operation. Any compatible key fob can be added, used or new. This currently requires obtaining the "security PIN for the CEM". PIN extraction is being developed. Users will be accepted to beta test key programming based on the need for information and testing on various models of CEM. I will make a separate post about beta testing key fob programming!
  

• Added support for 2024 models with new CEM hardware.
  
• Fix application hang when uploading logs
  
• Fix some programming reconnection issues due to Windows/PC behavior
  
• Fix issues reading VIN from car when the response is slow
  
• Speed and reliability improvements in flashing process
  
• Error messages improved for flash fail: which ECU not responding, reconnection timer to identify PC issues
  
• Other improvements - I've lost track of all the other but there are many fixes and improvements
  

Hi What is the best setting to go with to activate the pixel lights.

Hi, Is there a way to change the design of the Polestar 2 welcome lights and change the animations. When you lock and unlock the car

Hello all,

I am considering to upgrade my Volvo with a few options. 
However, I am still connected to local dealership and I would not like to get my vehicle banned by Volvo.

Suppose I add something( 360 cam, BLIS, park pilot assist, whatever).
Obviously this is some hardware that needs to be added + software to be loaded (let's imagine I can do everything with Orbit).

The question is - when I want to go to a dealership, and I revert all the software back to factory settings via Orbit, what should happen with the hardware?
My guess is that there would be a lot of faults and error messages if some hardware is present while software is not.
So the dealer might see it and understand my Volvo is not quite factory set.

Does anybody have such an experience?

Hey all, I searched through the master config codes and didn’t see anything that applied to this.

I just had the tow compute module added with a stealth hitch on my ‘18 XC60 for a bike rack that has lights. When plugging in the lights, the car thinks there’s a trailer attached and disables BLIS and Pilot Assist. Is there an option to have the lights work without disabling Pilot Assist?

Thanks!

Parameter 044 is labeled Stop In Speed Velocity - does anyone know what this does?
For refence, on my car (MY23 XC40 Recharge) it is set to 09 - 7 km/h by default.