As we all know 374 adds the Polestar mapping to the gearbox, giving it some higher revs and a bit more aggressive shifting. I checked option 005 and saw the original engine values for my car. It shows HP/Torque value. If you check the Polestar website, it gives you the optimized Polestar Values. These values are also under 005. Since they can change the gearbox mapping by changing a configuration bit, wouldn't it be possible to do the same with the engine mapping?

Did someone already test this option? My previous Volvo had a dedicated button for home and goodbye lights. Our current fobs do not have them. In my config this option is disabled and was wondering what the options were.

I was thinking about possible retrofits on v90. Then I thought: is it even possible to retrofit 4 zone climate control? Did anyone try it?


Skickat från min iPhone med Tapatalk

Hi,

For non memory seats, is it possible to activate exterior mirror tilt in reverse?

Thanks

v0.4.4 has been released. This is a small update with a timely fix for recent Volvo software updates causing problems for OrBit

Updates

• OrBit now reports version in the console when starting
  
• "Pre-2020" PHEV contactor control (open contactors before flashing, if they are in the closed state, instead of fail flash due to contactor state) is added.
  

• Recent software update to some 2022-23 models caused OrBit to fail setting mode to active, or opening contactors on PHEV models, when writing config. Reason is due to VGM firewall updated to block the commands when not disabled. OrBit now disables VGM firewall before setting mode and checking contactors.
  

Have enabled and since disabled a few configuration items using OrBit which has been awesome!

I now find that there are some gaps in both the car functions and applications pages where items I have disabled due to incompatibility once were.

Does anyone know of a way to rearrange the icons or at the very least clearing out the empty spaces?

I appreciate this is quite minor, however it really triggers my OCD seeing the boxes scattered all over the screen!

So I swapped a used module.

Plug and play nothing works. Next step is to check orbit config and hope the module can be used on another car.

I'll continue this thread once I have updates.


Sent from my Pixel 6 Pro using Tapatalk

Hi all, 
my late 2017 XC60, whit sensus, does not have a backup camera. Only the pieps are there. If I fit one and connect it myself, can I than activate the camera in OrBit or is this really dealer work? Dealer said there is some software missing that the have to install.
Is there somebody who knows? Thanks in advance, have nice weekend.

Hi 

I'm about to retrofit interior illumination package. Currently i ove 03 interior ligtning mid version. I have footwells light and a tiny bulb in my rearview mirror. I purchased wood trim decors dor my doors, suprisingly they arrived with illumination strips, but no cable. I have an power outlet behind my decors. Does anyone know which connector/cable needs to be purchased in order to connect them?
Did anyone try to upgrade interior illumination and can tell what is the difference b/w 183 - 02 and 183 - 81. Besides door decors, are there any other sources of light when upgrading from interior lightning mid version to high version. 
Greatfull for any inputs

Hi everyone,

I have replaced my VCU1 in my xc40 , i put an used one from *bay ( i try to reload with VIDA without succes part number same ) , my problem is car is not starting , starter works fine , but i think fuel not coming , i want to know if VCU1 not from car can refuse engine starting ?
what can be the good solution except buying new vcu1 from dealer ? reflash with orbit is possible ? any advice will be grateful.

in Vida talk about ecm check serial number between ecm and vcu1, but i'm confused

ps : I replaced vcu1 because water inside ( loooong story about that ) , i put vcu1 in garbage  so i can't read dump or something else to swap dump.