+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: OrBit Application (https://forums.spaycetech.com/forumdisplay.php?fid=9)
+--- Forum: Releases (https://forums.spaycetech.com/forumdisplay.php?fid=11)
+--- Thread: OrBit Beta v0.9.2 release notes (/showthread.php?tid=269)
OrBit Beta v0.9.2 release notes - Power6 - 11-27-2023
0.9.2 is released. Some new things are added and other features are released out of beta.
NOTE: Sorry for the delay, there were a couple late additions that were really needed, which extended the time to get them done, while anyone waiting for key programming release was hanging on that...
(Latest version of OrBit can always be downloaded here: https://app.spaycetech.com/orbitupdate/download)
New features:
- Air Suspension Calibration is now general release, for all licensed cars equipped. Calibrate, and "trim" (lower and raise default height) in one easy dialog with OrBit.
- Key programming is released, and available for all licensed cars. The CEM "Security PIN" is required to be entered to program keys, or see next item about extract.
- CEM Security PIN Extraction is added to support key programming. This is integrated with key programming, OrBit will offer to extract the security PIN to enable the ability to program keys. Not all CEMs are supported. Older CEMs generally not, most newer (2019+) CEMs are, and some newer CEMs are in "experimental" status. OrBit will recognize the CEM and report if it is supported for extracting the security PIN. I will post some guides soon, but intially OrBit fairly well guides you through what you need to program keys. Just connect to your car, and click the "Program Keys" button on the Service tab.
- CMA PHEV models are supported. These FWD PHEV models with single High Voltage Contactor(HVC) were not previously compatible with OrBit safety checks on the HVCs when programming. This support has been added.
Fixes:
- Major improvements made to speed in reading data from the car. Connecting to the car, updating display info, and time to read DID data have been improved significantly.
- ABS config clear has been revamped, for all variants but specifically to address intermittent issues on cars with "vacuumless" brake system (BCM2). Some cars were not completing this step successfully every time and left with DTC history causing error messages. This has been resolved.
- Updates to Air Suspension Calibration based on testing and feedback before release. OrBit now stores calibration info and shows actual suspension detected height even when "trimmed" to aid in measurement. Safety limit is added, OrBit won't let you calibrate outside of the same factory allowances as VIDA.
- Updates to Parking Camera Calibration to match specs from VIDA for monitoring and guidance on the process.
- Tweaks have been made to the "ECU Checks" when programming, to reduce the instances of "Flash Failed" due to ECUs not responding, when the situation is not very critical.
- PIN Finder has been updated to resolve an issue of incorrect reported PINs on particularly troublesome capture files, i.e. bad connection quality with dropped packets.
- Various small bug fixes and changes for improved reliability of OrBit