Hi!

First of all - thanks for your work on SPA programming!

Before I buy - i Wonder if it's possible to reset VCM module by triggering the same reset process as in VIDA Advanced test?


Having issues with VCM (gps position, WiFi e.g.) on my 2017 V90.

   

I have powered tailgate and back sensors, would it be possible to configure hands free tailgate open by leg movement in front of the bumper sensor?

jak włączyć menu takie jak na obrazku, nie mam menu
Xc60 2023r

Attached Files

Thumbnail(s)
   

Witam, posiadam Volvo XC 60 2023 z USA, jak działa WSPOMAGANIE PARKOWANIA, mam skonfigurowane wspomaganie parkowania, półautomatyczne parkowanie Gen3,
nie mam pojęcia jak to włączyć

If the dealer changes a stored setting in VIDA, will the new base configuration be used for the Orbit revert to OEM function? I don’t know yet if they can or will do this, but I’m going to see if my dealer will remove the factory Polestar tune from my Polestar Engineered car. I’ve already tried changing 374 to “Without Polestar” and that didn’t work. Thanks!

Hi there,

So I'm not sure if this can be programmed as a reset, if this is HCM, the light itself etc.? My 2016 XC90 came with active bending lights. Only the right side bends though. I have an error code of B128A01 - Left Head Lamp. General Electrical Failure. I'm pretty sure this is the 'why' as this is the one which doesn't bend.

No warning lights however on dash.

Now, could this be reset somehow? I don't know where to start with what would even need replacing here? The light unit maybe? It does go up and down when i start the car. Or would it be HCM?

If I get a new light and that's what is needed, would I need to programme it? Assuming not if using same HCM.

Help much appreciated

Sent from my Pixel 8 Pro using Tapatalk

Hello!
I got a SPA-based Lynk&Co 09. I assume it is running AAOS.
Is orbit compatible with this car? 
I want to enable adb access so I can sideload android apks onto it. I heard that it might be possible to enable adb with orbit.

Also, can you guys perform the paid PIN(CEM & VGM) retrieval service on Lynks?

I have an ENET cable, can run some experiments for you guys if you want to play with Lynks and Geelys

2017 V90

steering rack was changed to new one and now i get PSCM error, car works fine autopilot is only what currently not work. 

is there possiblity to calibrate PSCM for that new steering rack?

I have a Polestar 2 and two days back, I got the intimation that there's a software update available for the car. I have used Orbit and activated the Pixel lights. Can someone detail the process of updating the software/correcting my thoughts?

1) Backup configuration changes made through OrBit
2) Restore car to OEM using OrBit
3) Update the manufacturer provided software update
4) Restore changes made in OrBit
5) If one cannot restore, make the same config changes through OrBit

Is there a high level features list?

I want to see everything that has pre-configurations and whatever else is popular for a polestar 2

The pixel head lights and ACC/PA are the big two. What else is out there?