Posts: 582
Threads: 8
Joined: Feb 2023
Reputation:
53
As far as I know, it uses the same camera as lane keep assist uses which has electronic horizon and the sun sensor. Both are standard equipment in US.
If you are asking about bending lights, it uses SWM signal and the position sensor in the steering rack which are also used by cornering light function if you have LED front FOG lights.
Posts: 482
Threads: 43
Joined: Jan 2023
Reputation:
101
The 2016 model XC90, this early SPA is before the HCM was introduced. The CEM runs the headlights. If the car has LED headlamps, there are modules on the headlamp units to drive the LEDs, and the adaptive functions. The modules are not ECUs in the car loaded with software, they are just hardware controlled by the CEM through LIN bus communications.
It looks like the HCM was introduce to the SPA for 2017 MY on the LED headlamp equipped models.
Posts: 15
Threads: 5
Joined: Feb 2024
Reputation:
0
Can someone explain to me how to change the configuration string on the lamp? I have a new lamp with a new number. How can I save it using orbits?
Posts: 2
Threads: 0
Joined: Aug 2024
Reputation:
0
08-29-2024, 11:54 AM
(This post was last modified: 08-29-2024, 01:25 PM by Svoi83.)
Hello. Volvo V90 2019.
Please help me find files .sbl for flashing the units HCMR HCML.
The old headlights were stolen.
I bought used headlights but they need to be registered in the car.
I read that Orbit can do this but I need .sbl .vbf files. The headlights are just LED.
31689201 - LH
31655759 - RH
Posts: 2
Threads: 0
Joined: Aug 2024
Reputation:
0
No. the car was involved in an accident. While I was parked without a bumper, my headlights were stolen.
Posts: 1
Threads: 0
Joined: Sep 2024
Reputation:
0
Hi all I'm new here and find myself in a similar position to Svoi83. I've purchased a XC60 with the left headlight missing following an accident. I've sourced a replacement used headlight and fitted a new controller. My options seem to be either get the headlight software or purchased a used controller and recode. I read somewhere the headlight software needs to match is this correct? Any guidance would be greatly appreciated.
TIA