Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't connect to PS2 - previously have
#1
Got Orbit a little while back.  Turned on pixel headlights, a few other tweaks, worked great, zero connection/config issues, didn't change any firewall settings/etc. on the laptop.  Had to take it into Polestar for non-functioning seat heaters.  Before going in, connected, returned to stock.  Got car back from Polestar after a friggin' month.  Hooked up the laptop to restore my changes in Orbit.  It won't connect no matter what I do.  Same laptop, same Orbit install, same cable, same adapter, same same same.

2022 Polestar 2, software P3.1.9.

Windows 11 home
USB ethernet adapter
Amazon ODB2 connector

Tried:
  • Changing order of plugging in USB adapter, OBD2 connector, and starting Orbit
  • Door open and shut
  • Car plugged in and not plugged in
  • Car in drive and car in park
  • Windows Firewall on and off (for Domain, Private, and Public networks)
  • adding custom rule to outbound connections for the OrbitApp.exe

Orbit output:
OrBit v1.0.9
OrBit Disconnected
Requesting connect
Waiting for connection...
Found car
Connecting...
Waiting for the gateway to respond...
No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections
Error Reason: timeout
OrBit Disconnected
Requesting connect
Found car
Connecting...
Waiting for the gateway to respond...
No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections
Error Reason: timeout
OrBit Disconnected
Reply
#2
It is recommended to power off the negative electrode of the 12V battery and the backup battery of the trunk BUB for 10 minutes, restore the vehicle in the reverse order, and reconnect the OBD to take a look, it should be able to connect.
Reply
#3
(Yesterday, 01:10 PM)VOLVO-pan Wrote: It is recommended to power off the negative electrode of the 12V battery and the backup battery of the trunk BUB for 10 minutes, restore the vehicle in the reverse order, and reconnect the OBD to take a look, it should be able to connect.

Thanks.  I think you're describing a TCAM reset right?  I've not tried that, so I'll give it a shot tonight/this weekend.
Reply


Forum Jump:


Users browsing this thread: jlo, 3 Guest(s)