Can't connect to PS2 - previously have - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1) +--- Forum: Car Connectivity (https://forums.spaycetech.com/forumdisplay.php?fid=14) +--- Thread: Can't connect to PS2 - previously have (/showthread.php?tid=744) |
Can't connect to PS2 - previously have - shortyjacobs - 01-11-2025 Got Orbit a little while back. Turned on pixel headlights, a few other tweaks, worked great, zero connection/config issues, didn't change any firewall settings/etc. on the laptop. Had to take it into Polestar for non-functioning seat heaters. Before going in, connected, returned to stock. Got car back from Polestar after a friggin' month. Hooked up the laptop to restore my changes in Orbit. It won't connect no matter what I do. Same laptop, same Orbit install, same cable, same adapter, same same same. 2022 Polestar 2, software P3.1.9. Windows 11 home USB ethernet adapter Amazon ODB2 connector Tried:
Orbit output: OrBit v1.0.9 OrBit Disconnected Requesting connect Waiting for connection... Found car Connecting... Waiting for the gateway to respond... No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections Error Reason: timeout OrBit Disconnected Requesting connect Found car Connecting... Waiting for the gateway to respond... No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections Error Reason: timeout OrBit Disconnected RE: Can't connect to PS2 - previously have - VOLVO-pan - 01-17-2025 It is recommended to power off the negative electrode of the 12V battery and the backup battery of the trunk BUB for 10 minutes, restore the vehicle in the reverse order, and reconnect the OBD to take a look, it should be able to connect. RE: Can't connect to PS2 - previously have - shortyjacobs - 01-17-2025 (Yesterday, 01:10 PM)VOLVO-pan Wrote: It is recommended to power off the negative electrode of the 12V battery and the backup battery of the trunk BUB for 10 minutes, restore the vehicle in the reverse order, and reconnect the OBD to take a look, it should be able to connect. Thanks. I think you're describing a TCAM reset right? I've not tried that, so I'll give it a shot tonight/this weekend. |