Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interior lights
#11
(09-14-2023, 06:34 PM)hak8711 Wrote: Does the polestar 2 also have RGB that could be enabled

id like to know that as well.
MidNight PoleStar 2 My2023 PPP
Reply
#12
Does Polestar have this little "night light" shining down from the roof console?
   
Reply
#13
https://imgur.com/a/qybCS1R [Image: qybCS1R]


Here is a picture I took of mine. It has 2 light diodes it seems. One left and one right

Thanks for all your work on this!
Reply
#14
Think i found the reason why i do not have RGB in my front light, found the PN: 32366218. Just checked out another car with this same model and it has illu-mid. So i need to go chase down another dark one with high-ilu. This PN has RGB: 31479612

To note: i chose the first model because i just thought that all cars with black headliner where highly speced.. and secondly the frame on the light is black also, going to try to move this over from my current one to the new one with a chrome frame.
V60 2020 
Reply
#15
Quick quesiton...2019 XC60...i have the ability to change the color on the front, but it doesn't save. It reverts back to white after I turn the car off. Is this just a compatibility thing? Or am I doing something wrong? 

TIA
Reply
#16
(08-26-2024, 05:26 PM)wirelessnate Wrote: Quick quesiton...2019 XC60...i have the ability to change the color on the front, but it doesn't save. It reverts back to white after I turn the car off. Is this just a compatibility thing? Or am I doing something wrong? 

TIA

Check you driver profile. If it's locked, it will revert all the changes back to state when the profile last saved and lucked.
Reply
#17
(08-27-2024, 03:05 AM)IMAY2023 Wrote:
(08-26-2024, 05:26 PM)wirelessnate Wrote: Quick quesiton...2019 XC60...i have the ability to change the color on the front, but it doesn't save. It reverts back to white after I turn the car off. Is this just a compatibility thing? Or am I doing something wrong? 

TIA

Check you driver profile. If it's locked, it will revert all the changes back to state when the profile last saved and lucked.
Reply
#18
Hi.
I had mid version from factory. I'm supprised as the door trim illumination front or rear door never worked. Just enable high level and I got possibility to change front row diode color and it works. All 3 door illumination start working as well both front and rear door. My question is: is that door illumination for front and rear door working in mid version? I mean the back light for door handle, storage space in the door and ground illumination when door is open.

Wysłane z mojego CPH2581 przy użyciu Tapatalka
Reply
#19
(08-27-2024, 03:05 AM)IMAY2023 Wrote:
(08-26-2024, 05:26 PM)wirelessnate Wrote: Quick quesiton...2019 XC60...i have the ability to change the color on the front, but it doesn't save. It reverts back to white after I turn the car off. Is this just a compatibility thing? Or am I doing something wrong? 

TIA

Check you driver profile. If it's locked, it will revert all the changes back to state when the profile last saved and lucked.

Thank you! I am an idiot! Should have been the first think I checked. Appreciate it!
Reply
#20
One other question. In my XC60 I have enabled mid lights I believe and it allowed the front center light to be changed to different colors. The ones above the rear doors are not lit. Would I need to change the entire assembly to update that? Or is it also wiring?
Reply


Forum Jump:


Users browsing this thread: 5 Guest(s)