Posts: 4
Threads: 0
Joined: Aug 2024
Reputation:
1
Hi,
Is it possible to increase the time between the moments you have to move the steering wheel? Or to turn this off completely?
I do everyday around 150km on highway, so I use the function a lot
Also is there an option where you can keep the lane kleeping on and just the speed off when you don't react anymore?
Because now when I get a heart attack, Volvo prefers I have a crash also.......
Posts: 593
Threads: 8
Joined: Feb 2023
Reputation:
53
Car gives warning for PA (Pilot Assist with ACC) in two conditions.
1) Driver does not move or touch the steering wheel more than 10 to 15 seconds. > You will see yellow steering wheel on the dash with sound.
2) If the driver ignores the first warning (yellow above). > You will see red steering wheel icon on the dash with sound then PA will disengage
Both PA and Lane keep assist has no warning sound if it does not detect the lanes.
In the PA mode, the steering wheel icon turns from green to grey while keeping the ACC.
If Lane keep assist does not detect the lane markings, the icon on the dash goes grey.
As I said earlier, both system are completely different and operate independently.
Posts: 3
Threads: 0
Joined: Mar 2024
Reputation:
1
Just FYI..
Today done the OTA 3.3.16 update. After the update I was welcomed by brake failure message, plus a bunch of other driveline related messages. I went to driving options and sure enough, the ACC setting was gone and CruiseControl was there instead. So it seems the update, updated certain parts of the car which caused conflict with the programming I did.
I re-coded the car for ACC and it is back to normal now.
Posts: 3
Threads: 1
Joined: Nov 2024
Reputation:
0
I can also confirm the latest update removes PA.
Reflashing is required
Posts: 60
Threads: 1
Joined: Mar 2023
Reputation:
1
Most firmware updates will lead to CEM config being reset to stock. It is best, if possible, to recode your car to stock with Orbit before applying update.