****You no longer need to manually put the car in "Active Mode" with the release of OrBit v0.3.1****
Most functions (code reading and clearing etc.) can be done in any mode. For flashing and functions that require Active mode, OrBit will switch the car mode
For PHEV and EV most models, OrBit controls the battery contactors when needed as well
See here for release notes and download latest OrBit version here
****You can still put the car in Active Mode manually if you like, it will not cause any problem. The instructions below are for reference on how to do that****
How to get into Active Mode depends on if your car has the start knob (ICE/PHEV) or no start knob (EV):
ICE/PHEV:
Sit in the car, have fob within range
Turn the start knob once quick with foot off brake to accessory mode
Turn and hold the start knob for 5-10 secs, foot off brake, until you see the dash light up, hear some noises under the hood etc.
EV:
Have the remote fob with you, sit inside th car and close the door
On the fob, press LOCK then UNLOCK
Press on the brake pedal and hold
Press the hazard flasher button twice, i.e. ON then OFF
**For issues with T8 vehicles "mode not correct for programming" see the post below**
Most functions (code reading and clearing etc.) can be done in any mode. For flashing and functions that require Active mode, OrBit will switch the car mode
For PHEV and EV most models, OrBit controls the battery contactors when needed as well
See here for release notes and download latest OrBit version here
****You can still put the car in Active Mode manually if you like, it will not cause any problem. The instructions below are for reference on how to do that****
How to get into Active Mode depends on if your car has the start knob (ICE/PHEV) or no start knob (EV):
ICE/PHEV:
Sit in the car, have fob within range
Turn the start knob once quick with foot off brake to accessory mode
Turn and hold the start knob for 5-10 secs, foot off brake, until you see the dash light up, hear some noises under the hood etc.
EV:
Have the remote fob with you, sit inside th car and close the door
On the fob, press LOCK then UNLOCK
Press on the brake pedal and hold
Press the hazard flasher button twice, i.e. ON then OFF
**For issues with T8 vehicles "mode not correct for programming" see the post below**