Posts: 473
Threads: 42
Joined: Jan 2023
Reputation:
94
Air Susp calibration is looking pretty good, I want the folks testing it to give me a little more feedback as I made some updates to the display and the process.
Probably when you are comfortable to try lowering a bit Patridge...and then recalibrate it back to "original" and confirm that works well, I'll be ready to release it.
Posts: 6
Threads: 2
Joined: Jul 2023
Reputation:
0
Cool, does it also mean it sits even lower when parked (with convenient exit/entry activated)?
Posts: 151
Threads: 5
Joined: Feb 2023
Reputation:
5
At -30mm ride quality suffers considerably. I’m going to be backing off a bit.
Not sure what the official numbers are but my measurements are
Off road: +40mm
Comfort: +/- 0mm
Eco: -5mm
Sport: -10mm
Easy entry: -35mm
So at -30mm your Comfort setting is only 5mm higher than the old Easy Entry height.
The way the lowering works is the same as using lowering links, but instead of fooling the height sensors in hardware you’re fooling them in software by spoofing the calibration.
Off road mode will be lower by the same amount.
This differs from the Heico system which can apparently modify each mode separately.
Sent from my iPhone using Tapatalk
Posts: 6
Threads: 2
Joined: Jul 2023
Reputation:
0
Thanks Partridge for the details and comment on the ride quality.
What I meant with my comment above was basically that with a -30mm lowering (from Comfort / default level), what happens then with Easy Entry..? Did you disable it or did you get to -65mm? Just wondering when something is going to be bottoming out..
Cheers
Posts: 29
Threads: 2
Joined: Feb 2023
Reputation:
4
Hi folks.
Just a quick one....trying to do adjust the ride height but the button seems permanently greyed out for me......am I doing something stoopid?
Thanks,
Gareth