Posts: 506
Threads: 8
Joined: Feb 2023
Reputation:
45
(07-01-2024, 08:55 PM)paunionutz Wrote: Hello guys. I just swaped my headlights with ABL. Everiting is working, but i notticed 2 problems:
1. I see shadow spots on the road from bouth headlights. Light is not uniform
2. When i have a car in front, i don't have light in the center, i bearly see something.
I din't config correct?
It's not the config, you need to realign your headlights after replacing.
There are two screws on each headlight (up and down) and (right to left).
Posts: 43
Threads: 3
Joined: Sep 2023
Reputation:
5
(07-02-2024, 01:00 AM)IMAY2023 Wrote: (07-01-2024, 08:55 PM)paunionutz Wrote: Hello guys. I just swaped my headlights with ABL. Everiting is working, but i notticed 2 problems:
1. I see shadow spots on the road from bouth headlights. Light is not uniform
2. When i have a car in front, i don't have light in the center, i bearly see something.
I din't config correct?
It's not the config, you need to realign your headlights after replacing.
There are two screws on each headlight (up and down) and (right to left). I already did that, before i test them, on the headlight device at TUV station
2019 Volvo V60
Posts: 34
Threads: 4
Joined: Mar 2023
Reputation:
2
07-02-2024, 04:18 PM
(This post was last modified: 07-02-2024, 04:21 PM by Pau1ey.)
(07-02-2024, 03:24 AM)paunionutz Wrote: (07-02-2024, 01:00 AM)IMAY2023 Wrote: (07-01-2024, 08:55 PM)paunionutz Wrote: Hello guys. I just swaped my headlights with ABL. Everiting is working, but i notticed 2 problems:
1. I see shadow spots on the road from bouth headlights. Light is not uniform
2. When i have a car in front, i don't have light in the center, i bearly see something.
I din't config correct?
It's not the config, you need to realign your headlights after replacing.
There are two screws on each headlight (up and down) and (right to left). I already did that, before i test them, on the headlight device at TUV station
Which of these did you choose for 109 ACTIVE HIGH BEAM?:
04 With AHB2 (Adaptive), Low Beam in Village
05 With AHB2 (Adaptive), High Beam in Small Village
We're using setting 04 on both XC90 & XC60 after trying and not liking 05 which had that dark gap when following a car.
___________________________________
2019 XC90 T6 R-Design
Passion Red
4C, Advanced, B&W, CF Inlays, Heated Steering Wheel/Rear, Polestar, 20s
2020 XC60 T5 Momentum
Bright Silver Metal
Advanced, HK, Multimedia, Premium, Heated Steering Wheel, 20s
Posts: 43
Threads: 3
Joined: Sep 2023
Reputation:
5
(07-02-2024, 04:18 PM)Pau1ey Wrote: (07-02-2024, 03:24 AM)paunionutz Wrote: (07-02-2024, 01:00 AM)IMAY2023 Wrote: (07-01-2024, 08:55 PM)paunionutz Wrote: Hello guys. I just swaped my headlights with ABL. Everiting is working, but i notticed 2 problems:
1. I see shadow spots on the road from bouth headlights. Light is not uniform
2. When i have a car in front, i don't have light in the center, i bearly see something.
I din't config correct?
It's not the config, you need to realign your headlights after replacing.
There are two screws on each headlight (up and down) and (right to left). I already did that, before i test them, on the headlight device at TUV station
Which of these did you choose for 109 ACTIVE HIGH BEAM?:
04 With AHB2 (Adaptive), Low Beam in Village
05 With AHB2 (Adaptive), High Beam in Small Village
We're using setting 04 on both XC90 & XC60 after trying and not liking 05 which had that dark gap when following a car.
I use 05. I'll try 04 to see how is it. Thanks
2019 Volvo V60
Posts: 4
Threads: 0
Joined: Dec 2023
Reputation:
0
You have pixel led headlamps what you are noticing is matrix led headlights
Sent from my iPad using Tapatalk
Posts: 17
Threads: 3
Joined: Nov 2023
Reputation:
1
07-06-2024, 02:21 AM
(This post was last modified: 07-06-2024, 02:22 AM by Joe558.)
Evening all. I swapped from US headlamps without bendy to EU bendy. I’ve tried a few different settings in orbit (various ahb settings, bendy on and off, and a slew of headlight types) but I’m consistently getting the below on both left and right hcm:
B15AD - Headlamp Control Module LED Channel 4- General Electrical Failures- Circuit open
I’m also getting this on the cem:
B14C2 - Head Lamp Input- Bus Signal / Message Failures- Invalid serial data received
Anyone have any thoughts ?
Posts: 506
Threads: 8
Joined: Feb 2023
Reputation:
45
(07-06-2024, 02:21 AM)Joe558 Wrote: Evening all. I swapped from US headlamps without bendy to EU bendy. I’ve tried a few different settings in orbit (various ahb settings, bendy on and off, and a slew of headlight types) but I’m consistently getting the below on both left and right hcm:
B15AD - Headlamp Control Module LED Channel 4- General Electrical Failures- Circuit open
I’m also getting this on the cem:
B14C2 - Head Lamp Input- Bus Signal / Message Failures- Invalid serial data received
Anyone have any thoughts ? Assuming you got the headlights with their controllers and they are correct side.
That usually happens when you choose the wrong headlight type with the wrong feature or the headlights are faulty. Post here the headlight stickers, easier to advise for correct type and feature.
Posts: 17
Threads: 3
Joined: Nov 2023
Reputation:
1
I got the headlights with the hcm on them, but had to replace one after the fact. With that said I got the files from support to reprogram them and took care of that.
|