Polestar 4 and OrBit.

[Timurbuy]

Hello folks,

I just wanted to make sure this software will work with my Polestar 4 before I buy it, does anyone know or tried?

Need to clear the code B120600 Crash Occured.

Thanks.

[BeachBoy]

it *should* work, I don't think I've read anyone with one here.

@power6 any user with a Polestar 4 registered?

[Power6]

Hi! So we officially don't support the Polestar 4 currently. For most cases, that is the end of it, because being able to change the config on these new cars is probably not possible.

That said, you can connect to the car, and for this particular case, you can take the car out of crash mode with OrBit. You do not need any PINs for the car to do it.

[BeachBoy]

Wow, so they got to a point where it's not possible to change settings? That's sad

Sent from my Pixel 9 Pro XL using Tapatalk

[rashidkhuram1]

Hi! So we officially don't support the Polestar 4 currently. For most cases, that is the end of it, because being able to change the config on these new cars is probably not possible.

That said, you can connect to the car, and for this particular case, you can take the car out of crash mode with OrBit. You do not need any PINs for the car to do it.

Hello,

I'm new to this software and looking forward to using it. Am I right in thinking you would need to delete the fault code on the becm module in ecu tools to remove the crash mode or is there a different way of doing it?

Thank in advance