Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enabling Pilot Assist and Adaptive Cruise Control
After update 3.4.4 I had to choose ACC version 2. I had ACc version 1 before. It works the same as before though.
XC60 B4 2022 Momentum pro - Pilot assist and Polestar mode with Orbit
Reply
(04-12-2025, 08:58 PM)danthe88 Wrote: I would gladly buy VIDA subscription and all available upgrades, but if I am not wrong, it is impossible to buy VIDA access from Europe Sad
Also not sure if I already have it, any way to check?

i can help you with vida software upgrades (if needed)
Reply
(05-26-2025, 08:06 AM)fkruis Wrote:
(04-12-2025, 08:58 PM)danthe88 Wrote: I would gladly buy VIDA subscription and all available upgrades, but if I am not wrong, it is impossible to buy VIDA access from Europe Sad
Also not sure if I already have it, any way to check?

i can help you with vida software upgrades (if needed)

If you connect an EU car to a US VIDA your car will be blocked. Ask me how I know...
Reply
(04-14-2025, 03:32 PM)IMAY2023 Wrote: Curve speed can be enabled but the software must support it.  I enabled it on My officially upgraded ACC / PA (replaced the unit and installed it via VIDA) but never saw it working. Maybe the roads in CA / USA are not all included, I don't know.  
Be very careful with installing the software. The PA software is in the BSM, CEM and some other modules. If you install a wrong software your car won't even start. 
Go to a dealer and just get a quote for upgrading officially.

I activate with Orbit on my car, and is really working, but only in some countries (i think is country restrictions problem). In my case i saw it working in Greace on the highway. I was driving on PA, and at one point the  the PA  icon disapear from DIM, and 2 curve lines apeared instead. The car break before the curve, but in my opinion is slowing to much. One curve that i could take with 80-90 km/h on cruising, or 120 km/h in sport mode, the car slowing down until 60 km/h. In Bulgaria to, worked at some point
Reply
(04-04-2025, 04:04 AM)doubleohwhatever Wrote: Can anyone tell me what settings I need to change to have a 2024 Polestar 2 continue moving in traffic jams instead of stopping after 3-5 seconds?

I recently heard that PA was installed on the xc90, and after stopping in a traffic jam, PA itself moving after the car in front, even after 5 seconds of standing still.

Does anyone know which setting is responsible for this?

145 TRAFFIC JAM ASSIST 
- 04 Level 3 - Doesn't start moving on its own, after 5 seconds of inactivity (I have the default value)
- 05 Level 4 - the same as in the previous point.
Reply
Hi,

On my 2018 Xc40 T4, I successfully activated ACC/PA.

These are my settings,

023 - 04
036 - 03
145 - 02
314 - 01
318 - 03

I can get PA to work, it will even keep my car in lane. But the problem is, I do not get the green steering symbol on the lower left of my dash - only the symbol showing distance away from car in front.
Is there any settings i missed?
Reply
You need to hit the right arrow on the left Dpad to switch to pilot assist. The car defaults to adaptive cruise when you turn it on.
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)