Retrofit Volvo V60 B&W

[IMAY2023]

cut out a thin plywood and glue it so that the plastic clips hold it or just use double sided tape to stick the cover over the whole. With little bit heat you can remove later on

[ayastrebov]

cut out a thin plywood

Come on, that's an awful idea. 

I have designed and 3Dprinted the rings. Will install them in a few weeks
   

[SlapNutz]

Hi can someone look into this as I can't be bothered to retype everything.


https://forums.spaycetech.com/showthread.php?tid=885

Any idea response would be great.

Regards
Slapz

[Griszka_Kiszka]

Hi everyone,

I have a question. When changing from a Harman Kardon amplifier to a Bowers Wilkinson in the V,S 60, should the pin order in the amplifier plug be changed? The amplifier generation remains the same.

[Sodertalje]

Hi everyone,

I have a question. When changing from a Harman Kardon amplifier to a Bowers Wilkinson in the V,S 60, should the pin order in the amplifier plug be changed? The amplifier generation remains the same.

Nope, it's plug and play.

[Griszka_Kiszka]

Hi everyone,

I have a question. When changing from a Harman Kardon amplifier to a Bowers Wilkinson in the V,S 60, should the pin order in the amplifier plug be changed? The amplifier generation remains the same.

Nope, it's plug and play.

Thanks

[ayastrebov]

For those who are upgrading from High Performance to H/K or B&W

It's very convinient to add a second plug, so that you can easily swap the amplifiers. Could be very handy when visiting dealership.