04-04-2025, 04:04 AM 
		
	
	
		Can anyone tell me what settings I need to change to have a 2024 Polestar 2 continue moving in traffic jams instead of stopping after 3-5 seconds?
	
	
	
	
	
| 
					Enabling Pilot Assist and Adaptive Cruise Control
				 | 
| 
		
		
		04-04-2025, 04:04 AM 
		
	 
		Can anyone tell me what settings I need to change to have a 2024 Polestar 2 continue moving in traffic jams instead of stopping after 3-5 seconds?
	 
		
		
		04-04-2025, 06:11 PM 
		
	 
		By design, the ACC / PA deactivates after being stand still for more than about 5 seconds. If the car is stopped less than that, it resumes automatically.  To resume ACC/ PA after stopping more than 5 seconds, you will need to gently press on the gas pedal or use the resume button on the steering wheel. There is no configuration to disable or extend that 5 second duration. Since you mentioned 2024 Polestar 2, you should have creeping mode. 
		
		
		04-04-2025, 06:21 PM 
		
	 
		I am trying to start the assistant in my car, but there are errors. In the wizard I have an ABS and SRS error. I do not know what I can manually turn on to check. I have momentum with several options.
	 
		
		
		04-12-2025, 08:29 PM 
		
	 
		I have a 2019 XC60 T6 Inscription that came with Pilot Assist (PA) from the factory. However, it doesn't function as expected, at least in my experience. The system is unreliable. Today, on a clear day with perfect road markings and a slight curve, it drifted entirely over the line into the oncoming traffic lane. If I hadn't intervened by steering it back, it would have continued straight into the ditch. This happens frequently, and it seems somewhat reliable only at speeds below 40 km/h. Has anyone else encountered a similar issue? Is there a way to fix this problem? Unfortunately, the dealership in my country is not helpful, so getting a software upgrade is not an option for me. 
		
		
		04-12-2025, 08:48 PM 
		
	 Quote:Has anyone else encountered a similar issue? Is there a way to fix this problem? Unfortunately, the dealership in my country is not helpful, so getting a software upgrade is not an option for me. If you have the PA from factory, You might install the official upgrade from VIDA. part number 32259216 It was around $150 USD. 
		I would gladly buy VIDA subscription and all available upgrades, but if I am not wrong, it is impossible to buy VIDA access from Europe   Also not sure if I already have it, any way to check? 
		
		
		04-13-2025, 02:22 AM 
		
	 
		The upgrade includes curve speed assist. If you have that button on the functions tab, then you already have it.    As far as I know, you can purchase VIDA but cannot order software and some authorized service can order for you and add it to your account. May be I am wrong that's what I heard. You just might need to calibrate the front camera behind the mirror. 
		
		
		04-13-2025, 07:50 PM 
		
	 
		Curve speed assist can be enabled using orbit, but I don't have it from the factory... I will try to find somebody who can add software. I believe there is one person on another forum that I follow, but I always thought a 3-day subscription could be bought only from the USA. Thank you 
		
		
		04-14-2025, 03:32 PM 
		
	 
		Curve speed can be enabled but the software must support it.  I enabled it on My officially upgraded ACC / PA (replaced the unit and installed it via VIDA) but never saw it working. Maybe the roads in CA / USA are not all included, I don't know.   Be very careful with installing the software. The PA software is in the BSM, CEM and some other modules. If you install a wrong software your car won't even start. Go to a dealer and just get a quote for upgrading officially. | 
| 
					« Next Oldest | Next Newest »
				 |