Polestar 2 charging port US-EU

[kaska3er]

Hi, anybody has attempted to do type1 to type2 charging port swap? I know that it can run on Factory OBC(charger module). Maybe some of you attempted to do this and have working 3-phase charging. I see on config position number 029 but maybe modules need to be flashed or sth. I Think same procedure will apply to every EV and PHEV vehicles.

[R1maS]

Did this yesterday - Type2, but cable from charging port to battery has to be replaced with European one. Do not ask me how to replace the cable - it has been done by the customer itself, my role was just to make the car European

[kaska3er]

Yep i know that i need to put battery off vehicle. So it’s just edit in config and 3phase type 2 is working?

[R1maS]

Yep i know that i need to put battery off vehicle. So it’s just edit in config and 3phase type 2 is working?

yep

[nelda]

i have also done this conversion a week ago. Lowered the battery and changed the cable. a lot of work but its working as it should.