HUD Retrofit

[Eilert]

Hi im about to retrofit HUD into my v90 t8 my18. i have recived all the parts as is folowing 

HUD dashboard cover : 31417204 
HUD Module : 31687417 
HUD mounting screws :30640826 X1 
HUD mounting Screws : 31109118 X2 
HUD Repair teminal (conector without cables) 31384466 
LVDS Cable (from dim to hud) 31438200 

i bought my lvds cable from aliexpres due to volvos priceing being redicules for that part

now to my question. do anybody have the instruction how to remove the hole dashbord in an v90 t8? 
And if someone have the correct wiring diagram for volvo v90 t8 my18 the whold also help. i only have acces to volvo 2024 wiring diagram and it might not be correct to my car.

[IMAY2023]

Hi im about to retrofit HUD into my v90 t8 my18. i have recived all the parts as is folowing 

HUD dashboard cover : 31417204 
HUD Module : 31687417 
HUD mounting screws :30640826 X1 
HUD mounting Screws : 31109118 X2 
HUD Repair teminal (conector without cables) 31384466 
LVDS Cable (from dim to hud) 31438200 

i bought my lvds cable from aliexpres due to volvos priceing being redicules for that part

now to my question. do anybody have the instruction how to remove the hole dashbord in an v90 t8? 
And if someone have the correct wiring diagram for volvo v90 t8 my18 the whold also help. i only have acces to volvo 2024 wiring diagram and it might not be correct to my car.

Can you please share the link for aliexpress, I'm looking for the same cable. 
Regarding the instruction,  I have the instructions for 2019 S60 from the VIDA, it should be similar at least for the order of things. 
Good luck and let us know the outcome and how long it takes.

[paunionutz]

I bought this one Just found this amazing item on AliExpress. Check it out!
RON126.11 | Eightwood Vehicle High-speed Data Transmission FAKRA HSD B Code Male USB LVDS Shielded Dacar 535 4-Core Cable for Benz BMW Audi
https://a.aliexpress.com/_EG82585
I didn't install HUD, because the seller from ebay send me an RHD HUD. Now i wait the good one to arive

[Eilert]

Hi im about to retrofit HUD into my v90 t8 my18. i have recived all the parts as is folowing 

HUD dashboard cover : 31417204 
HUD Module : 31687417 
HUD mounting screws :30640826 X1 
HUD mounting Screws : 31109118 X2 
HUD Repair teminal (conector without cables) 31384466 
LVDS Cable (from dim to hud) 31438200 

i bought my lvds cable from aliexpres due to volvos priceing being redicules for that part

now to my question. do anybody have the instruction how to remove the hole dashbord in an v90 t8? 
And if someone have the correct wiring diagram for volvo v90 t8 my18 the whold also help. i only have acces to volvo 2024 wiring diagram and it might not be correct to my car.

Can you please share the link for aliexpress, I'm looking for the same cable. 
Regarding the instruction,  I have the instructions for 2019 S60 from the VIDA, it should be similar at least for the order of things. 
Good luck and let us know the outcome and how long it takes.

thx for the diagrams.
may i ask if you know any place where i can find a wiring diagrams for my18?

link to the cable i got : 
remeber that one end has to be a 90° (bend) and the other 0° (straight)

https://www.aliexpress.com/item/10050046...1802jchOfL

[IMAY2023]

@Eliert, 
Connecting the HUD is not that complicated, but the job of pulling out the dashboard and cutting it is pain in the bud.  Volvo should have made this replicable from the windshield like BMW.   Here is the wiring diagram for S90  from MY17 and MY18 but main components like HUD. are still the same today. 
https://forums.spaycetech.com/attachment.php?aid=335
Thanks for the link.

[ghanshyamkamani@gmail.com]

Hi,

I am new to this forum and think about to have HUD that shows speed and navigation instructions on my 2019 XC90. Anyone ever figure it out how to do this, what all parts required? And what would be the procedure?

I have HUD but that just shows collision red light, nothing else.

[IMAY2023]

Hi,

I am new to this forum and think about to have HUD that shows speed and navigation instructions on my 2019 XC90. Anyone ever figure it out how to do this, what all parts required? And what would be the procedure?

I have HUD but that just shows collision red light, nothing else.

First, you'll need to find a used HUD. Not that a problem these days from ebay.  
you'll need to buy the VLS cable (from HUD to DIM), some connectors and pins, the trim that covers the HUD. (Don't know if your current one and the regular one are the same size) 
You'll need to pull out the dashboard, cut the hole for the HUD (again don't know if your current one is the same size) 
Connect the HUD, configure via orbit and put the dash back. 

But before doing all that, test it first. 
You can only pull out the DIM, connect and wire it. Then configure it from Orbit. see that is working only then pull out the dash if you still want to go with it.

[spacey]

Hi im about to retrofit HUD into my v90 t8 my18. i have recived all the parts as is folowing 

HUD dashboard cover : 31417204 
HUD Module : 31687417 
HUD mounting screws :30640826 X1 
HUD mounting Screws : 31109118 X2 
HUD Repair teminal (conector without cables) 31384466 
LVDS Cable (from dim to hud) 31438200 

i bought my lvds cable from aliexpres due to volvos priceing being redicules for that part

now to my question. do anybody have the instruction how to remove the hole dashbord in an v90 t8? 
And if someone have the correct wiring diagram for volvo v90 t8 my18 the whold also help. i only have acces to volvo 2024 wiring diagram and it might not be correct to my car.

AFAIK HUD also requires a different windshield, not just dashboard components.

[IMAY2023]

Hi im about to retrofit HUD into my v90 t8 my18. i have recived all the parts as is folowing 

HUD dashboard cover : 31417204 
HUD Module : 31687417 
HUD mounting screws :30640826 X1 
HUD mounting Screws : 31109118 X2 
HUD Repair teminal (conector without cables) 31384466 
LVDS Cable (from dim to hud) 31438200 

i bought my lvds cable from aliexpres due to volvos priceing being redicules for that part

now to my question. do anybody have the instruction how to remove the hole dashbord in an v90 t8? 
And if someone have the correct wiring diagram for volvo v90 t8 my18 the whold also help. i only have acces to volvo 2024 wiring diagram and it might not be correct to my car.

AFAIK HUD also requires a different windshield, not just dashboard components.

We have been in this debate, it's not required! VOLVO keeps telling it does because they sell it more expensive.  There is a heated windshield that is not suitable for HUD because of the heating elements inside the glass, it distorts the reflection.  My friend replaced his windshield with aftermarket regular one and he has no issues!

[BeachBoy]

You could put a small rectangular film where the HUD projects... And then get both heat and HUD.

That's something I'd really like to have. I drive very often above speed limit and constantly need to monitor speed. Down in cluster is not ideal.

Sent from my SM-S911W using Tapatalk