fitting backup camera

[Piet]

finally found the time to fit the camera and pull the cable. And......it works like a dream. Great 

               

[marinalin85]

Can't understand how uploading photos work on thia forum but I can share a youtube video (ignore the sound, it was made for my brother). It was uploaded in 720 but I filmed it in 1080p (maybe it will upload in fullhd later on)
Backup Camera V60
Camera came from China but it was OEM Volvo (original package and everything) is just things are cheaper there compare to Germany (at least)
Quality wise, very good
I will try to make that DIY camera washer later but right now, if I'm doing anything to the car, my gf will kill me )

Tnx for video, it looks really nice, all like OEM, and seems that cam from China really OEM , pls if you can send by PM link for that seller from China where you purchased, if forbidden post such things at forum.

Yes, girlfriends are usual angry when we guys whole time work on our cars   ...  Post when you can link of that washer from Amazon, would be interesting see your project .

BackUp Camera (4pin)(you can negotiate the price )
Auto Parts store AliExpress
For camera washer:
DIY Camera Washer Kit

This one is like a complete kit. There are separate nozzles and hose. 3m is way to much 
Also i saw a few flat or low profile ones on AliExpress and Temu but I can't find them anymore

Based on the idea to fit a washer nozzle close to the camera, does anybody knows if the fluid that goes to the back is heated or not?
I know that the front blades are heated but not the fluid tho. It might be the same in the back? Since they come from the same pump assembly as the front fluid (different pump tho)
Cab't find any information about it but I think its not since the glass is heated

[marinalin85]

Made it last week
Forgot to post it
Wasn't difficult except shaping the actual nozzle cause it was to bulky. There are other smaller but they don't have threads. Maybe you can find one slim with threads

https://ibb.co/dbwn19R
https://ibb.co/QvNMg0Z
https://ibb.co/jJpPJVZ

Video in action (with some dirt)
https://youtube.com/shorts/CnRNJjPgj5U?s...bQN81sgJl6

[Sir0cco]

Ok. So also me I finally made a mess in my XC90.

I have enabled Today the backup camera -> in 2016/2017 models of XC90 the backup camera requires PAC360 module to be installed.
This one is not a simple cable from IHU to backdoor handle. There is a CANBUS unit in between.

It goes like following:
1. cable from IHU (radio) to PAC unit (located under passenger feet) (separate harness - #1)
2. cable from WAM/PAC to power +12V and to CAN bus (secure one, same for BLIS) - harens #2
3. cable to camera in the back door handle - harness #3
4. camera in the handle - 6PIN

Success in a way that IHU sees the unit - allows to turn on the camera view. But the camera window itself is black black.

Has anyone done it already?

The manual says that after installation of hardware - volvo requires a "software reload"
Is this reload only configuration or indeed it is some kind of pairing with the main unit?

Cheers, k.