Retrofit Volvo V60 B&W

[knion]

cut out a thin plywood

Come on, that's an awful idea. 

I have designed and 3Dprinted the rings. Will install them in a few weeks

Hello, can you please provide the 3d object (stl file) ? or send it to may email ? (stefan@ungurean.ro) 10x

[Volvo_Nut]

I worked with a Volvo tech to verify the B&W Gen 1 part numbers

Below is a summary of the hardware parts for the Bowers & Wilkins Gen 1 [2019-2020 gold speakers].  A software configuration change is required with Orbit.  It is possible that VIDA might recognize it and perform a software update but unlikely since the car did not come with B&W from the factory.  I recently installed a heated steering wheel into a 2016 XC90 R-Design and VIDA did recognize it even though 2016 R-Designs did not have a heated wheel from the factory in the U.S.


B&W - Gen 1 ::  2020 V60PE and 2020 S60PE used to confirm numbers

PART ............................................................. QTY .... PART NUMBER
Amplifier .......................................................... 1 ........... 36010455
B&W S/V60 center speaker grille ........................ 1 .......... 39829157
Loudspeaker, Center, Premium Sound System ..... 1 ........... 31350432
Speaker, base front door ................................... 2 ........... 32246255
Speaker, tweeter front/rear door ........................ 4 ........... 31350430
Speaker, mid-range front door ........................... 2 ........... 31456249
Speaker, base rear door .................................... 2 ........... 31438280
Speaker, roof / parcel shelf ................................ 2 .......... 31438338
Subwoofer ........................................................ 1 .......... 31456823
Loudspeaker ..................................................... 1 .......... 32201744
Speaker bracket bolt ......................................... 20 ......... 30640943


Here's a snapshot of the excel spreadsheet if anyone wants clean image: