Interior lights

[bluepurplelion]

That last picture in:

https://forums.spaycetech.com/showthread...70#pid8470

The last picture perfectly shows why its not possible to change the door paddle lights without breaking your fingers or removing the door trim panel, its a pain i like to change without doing this it just need 2-3cm more cable.

Very true. I had the same problem when I was trying to add the foot well lights for the rear passengers under the 2 front seats. There just isn't enough cable length so I had to unscrew the front seats and tilt them forward to gain a better access angle. On the plus side, the door card of the XC60 is probably the easiest ones to remove that I've ever encountered. You unscrew 3 screws, slide it upwards and it's off! Unclip the door handle cable and a wiring connector and you can remove it entirely from the car. It's so easy and quick that it's not worth trying to do it without removing the door card, also because these puddle lights are a real pain to remove without damaging them (at least I haven't found it yet).