05-28-2026, 10:41 PM
(This post was last modified: 05-28-2026, 11:36 PM by soulvoid86.)
(05-28-2026, 06:08 PM)IMAY2023 Wrote: If your headlights are MID LED, you cannot enable bending. If you do, you will get bunch of DTCs and headlights might not operate properly. Because the MID LED headlights would not have the elements inside to move the leds side to side and the controller module might be labeled "L" Bendy lights require "H".
You can try Adaptive option with MID LED headlight. It's not going to be cornering but it will act like a dimmer between high and low beams instead of full on / off high beams in auto high beam mode.
Thanks for the info! I'll try to confirm my module before messing with the cornering option.
(05-28-2026, 06:08 PM)IMAY2023 Wrote: If your headlights are MID LED, you cannot enable bending. If you do, you will get bunch of DTCs and headlights might not operate properly. Because the MID LED headlights would not have the elements inside to move the leds side to side and the controller module might be labeled "L" Bendy lights require "H".
You can try Adaptive option with MID LED headlight. It's not going to be cornering but it will act like a dimmer between high and low beams instead of full on / off high beams in auto high beam mode.
Checked my headlights and there's a sticker on top of both that clearly says MID LED. So no cornering lights for this one.