Second config change to S60 MY23 worked fine audible feedback not

[jos]

Well i think when he (maybe her, lets call it it) opens the door without unlocking alarm should go off even in basic config?
Do you think that i need to enable the siren somehow or simply connect it? Is the bold in the chassis? My siren has the holder but on the picture it looks like bolt is missing, do you know the size/length of screw/bolt?

Which config options would indicate if there is alarm by factory in basic/advanced option? 

064. ALARM Without Alarm
064. ALARM ALARM
064. ALARM With alarm using vehicle horn
064. ALARM With alarm for the Netherlands

I would expect i have currently 03, not checked yet, but with audible locking currently enabled it would no use the horn for the locking confirmation, this is only possible by siren? If so it would make sense that audible locking currently isn't working because of the missing siren.

Option 02 ALARM is for the Sirene?
I can see there is an option if the Siren is the 714 one with tilt (066):

065. INTERIOR MOTION SENSOR Without
065. INTERIOR MOTION SENSOR Interior Movement Sensor
065. INTERIOR MOTION SENSOR Interior Movement Sensor Preparation

066. INCLINATION SENSOR Without inclination sensor
066. INCLINATION SENSOR With inclination sensor

Would be interesting if my oem config has 065 set to 03 (with preparation, cabling i expect)

I have not checked yet what 064 currently has and if i have the siren currently present, i think not because afaik i only have the basic alarm which checks for opened doors and claps without unlocking, there is no problem for me without the tilt sensor (i like to change my tires with locked car), i always try to not park illegal and my sourrounding if safe enough

I get back if things checked.


So for my current setup i would expect:

064 > 03
065 > 03
066 > 01

if the 713 siren arrived i would set 064 > 02, is this correct? should i do this before i connect the siren or vice versa? Can i connect the siren to it's connector while the car is battery connected?

Lets say some day i install 714 and the indoor sensor, do i need to have software flashed instead of config changes? please clarify if possible.

https://youtu.be/pzwxXes36Uk?is=bVZvEkAyG2SPvr-r


Best Regards JOS 

064. ALARM Without Alarm

064. ALARM ALARM
064. ALARM With alarm using vehicle horn
064. ALARM With alarm for the Netherlands064. ALARM
With alarm for the Netherlands