First config change to S60 MY23 worked fine but result partially - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: Forum (https://forums.spaycetech.com/forumdisplay.php?fid=18) +--- Forum: Bugs / Feedback (https://forums.spaycetech.com/forumdisplay.php?fid=19) +--- Thread: First config change to S60 MY23 worked fine but result partially (/showthread.php?tid=1276)

First config change to S60 MY23 worked fine but result partially - jos - 04-05-2026 Hi, Today, I changed the configuration of my Volvo S60 B5 AWD Ultimate Dark MY23 (Volvo UX 5.0.5) for the first time. These are the settings I modified: 043 Max Vehicle Speed Limitation from 180 to 250 (untested, not possible yet) 096 Audible Locking Feedback set to On (unfortunately not working)  271 Start/Stop Function Memory set to “Button without memory, standard symbol” (I don’t know where to find the switch. The car still turns the engine on/off as expected with this setting, but where the hell is that switch/button in the menus?) 374 Polestar Level set to “Polestar optimized” (had a short drive, can’t say much yet).  The flashing process completed successfully and everything looked good—there were some funny noises from the car during the read/write process.  So, why isn’t the audible locking feedback working? I refer to this: https://forums.spaycetech.com/showthread.php?tid=1257&pid=8665#pid8665 And does anyone have an idea where to find the switch to turn the start/stop system off for the current drive? @BeachBoy? Orbit ask for profile update (i had a virgin) so it updated and then my changes took place, flashing took about ~2 min afai remember right, everything was smooth. My battery was only at 63% with 12,6V starting later around 12V, i had a lab power supply connected 13,6V at 20A, the power supply jumped two times from CC to CV so the car sucks a lot   Best Regards JOS