Wireless Charger install on 2017

[Marcp]

Hello,

I’ve installed the wireless charger, but it’s not working.

- I’ve taken the 12V supply from the old cupholder 12V socket (pin 1 positive and pin 5 GND).
- The signal from pin 6 has been connected to pin FL41 on the CEM.
- I’ve set parameter 366 to 04, and also tested option 02.

Do you have option 450 configured?

The button appears on the screen without any errors.

Could you give me any advice or tell me how you have it configured?

Thanks.