+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Wireless Charger install on 2017 (/showthread.php?tid=970)
Wireless Charger install on 2017 - Nazsky786 - 07-28-2025
Hi,
Ive installed a wireless charger centre console from a 2023, ive used my old loom or else the car wont start and taken the 3 wires from the 2023 loom for the charger but the place where the wires go on the original loom are already populated.
Where do the 3 wires go as this car isn't supported to have the volvo charger. And on orbit what options do I need to change?
I have red, black and white. I'm guessing the red and black are power and ground but white is control but where do I install that?
Thanks.
Also what option do I choose on orbit? There is with on off button but is nfc used?
RE: Wireless Charger install on 2017 - IMAY2023 - 07-28-2025
The red power goes to the fuse box, It has its own 5amp fuse. (you can use a fuse tab)
The Black is the ground. you can get it from the passenger side under the center console behind the carpet.
The White one is the LIN communication goes to the CEM. FL 41.
RE: Wireless Charger install on 2017 - Nazsky786 - 07-29-2025
Any chance you know what options are to be selected on Orbit?
I have Orbit set to;
366 Wireless Phone Charger - 04 Inductive charging for smartphone + OnOff Btn
450 Wireless Phone Charging And NFC - 04 With NFC & WPC
I don't have the option on Sensus to turn on the wireless charging pad so its not working.
Thanks
RE: Wireless Charger install on 2017 - IMAY2023 - 07-30-2025
It depends on the unit you are installing. There are different variants of the wireless charging.
In addition, the FL 41 pin of the CEM where the wireless unit LIN is connected is empty on some of the CEMs. If your CEM does not have that pin, enabling it does not do anything.