Volvo V/S90 front seats retrofit/standalone.

[oleelstad]

So what did you guys do with the passenger seats? Like the one I posted above it doesn't seem to have the canbus connections. Or maybe I am mistaken.

The passenger seat should have canbus too, high pin 30, low 29. The passenger doesn't have anything in pin 31 IIRC - but should be identical otherwise!

If you're still struggling to find it, please pop a photo of the plug on the seat, will compare

See attachment.  

What the heck! Are they cloth? What year and what model are they from, I will dive into the wiring diagram?

And if you give pins 3 & 16 power, and pin 1 negative, it doesn't power on?

Look at his plug, his seat does not have any CAN wires going to it? That's plug block 506. How can he provide it a wake up command?

First of all oleelstad wrote below in his first post. 

I recently bought a few front seats from a Volvo S90 2018 model thinking I would put these in my patrol. Having worked with seats from earlier cars etc I thought this would be straight forward. However that is not the case.

So the wiring you mentioned

Aftermarket Wiring Diagrams CMA MY24
SJ1001860

is wrong!  It's for XC40 which is very different. The seat controller on those are not CAN BUS units. They are LIN bus slaves of the CCM.  
Besides, if you look closely to the pictures of the seats in the initial post of  oleelstad on the first page of this thread, those seats are manual! There is a handle beneath the seats! 

So, there is no seat controller to wake up! The wires you see in the picture of the connector are for the airbag, seatbelt, seat occupant sensor, the lamp under the seat and ground. I don't even see the power wire "red same gouge as ground " for heated seats.

The thing is that the driver seat is fully electric with adjustments all around. The lever you see under the seats are for the cushion on the front of the seat. 

Also on the passenger seat there is a lever for forward and backward adjustments. There is still a height adjustment that is electric in the rear and lumbar(air pump) adjustments. But these do not work. As you guys mentioned it could be a mini module like LIN for a wake up call. 

I still havn't gotten around to install them since I need to make a adapter for my Patrol. But I am closing in and hoping to be done with them in a very short time.