Car not responding

[kilmak]

One week ago changed some configuration in Volvo xc60 2018: 
-turned on ACC with pilot assist via config wizard to level 2
-turned on CarPlay and Android auto
-271 Start/stop memory to button with memory 
-374 polestar level to 02 polestar optimization 
-168 screen themes to 05 polestar (didn’t work)

After 2 days when I entered a car - both screens were not working and nothing happened when trying to start a car. 

Doors, lighting, etc working, but I can not start the car

OrBit could not connect to CEM
Attaching DTCs what OrBit can find 

---

OrBit DTC Report for YV1UZ68BCJ1032007 (last read: 2025/12/05 09:24:44)
BCM-U210856 - 2025/12/05 09:24:53
  Adaptive Cruise Control- System Programming Failures- Invalid / incompatible configuration
     Test failed
     Test failed this monitoring/operational cycle
     Pending DTC
     Confirmed DTC
     Test failed since last clear

BCM-U230054 - 2025/12/05 09:24:53
  Central Configuration- System Programming Failures- Missing calibration
     Test failed
     Test failed this monitoring/operational cycle
     Pending DTC
     Confirmed DTC
     Test failed since last clear

DIM-U2C8E86 - 2025/12/05 09:25:01
  Invalid Data Received in ChdLockgProtnStsToHmi- Bus Signal / Message Failures- Signal invalid
     Test failed
     Test failed this monitoring/operational cycle
     Pending DTC
     Confirmed DTC
     Test failed since last clear

DIM-U2C8F86 - 2025/12/05 09:25:01
  Invalid Data Received in WiprSysFailrDetdSafe- Bus Signal / Message Failures- Signal invalid
     Test failed
     Test failed this monitoring/operational cycle
     Pending DTC
     Confirmed DTC
     Test failed since last clear

DIM-U2C9086 - 2025/12/05 09:25:01
  Invalid Data Received in CrashUnlckFailrSts- Bus Signal / Message Failures- Signal invalid
     Test failed
     Test failed this monitoring/operational cycle
     Pending DTC
     Confirmed DTC
     Test failed since last clear