11-13-2025, 08:15 PM
IMAY2023 First of all, I want to sincerely thank you for your reply. Regarding the LIN bus, I understand that the heating command is the same as on the P3 platform, as someone has already implemented this system, but we'll find out once the installation is complete. Regarding the ventilation command, if I can find a car with these features, connecting to the LIN bus and listening to it won't be too difficult, as far as I understand. The main thing is to find a volunteer, and then I can reproduce the functionality on the table. I'm also very interested in the seat memory issue. I already purchased a door button unit and realized that it also communicates via LIN with the door module, which in turn sends commands via CAN bus to the seat module. I wonder where the motor positions are stored—in the seat module or not? If so, I could also try implementing a way to receive LIN data from the buttons and send CAN data to select or save the position.
I've already implemented additional functionality in my car using the ESP32 module, and it works successfully. It replaces the missing front parking sensor function on my MY12 XC70. I can add seat control via the ESP32 module. I just need to get the necessary logs and commands. Does anyone have a way to save the massage function call logs and the seat position saver for me?
I've already implemented additional functionality in my car using the ESP32 module, and it works successfully. It replaces the missing front parking sensor function on my MY12 XC70. I can add seat control via the ESP32 module. I just need to get the necessary logs and commands. Does anyone have a way to save the massage function call logs and the seat position saver for me?