Hey everyone,
I have a 2017 XC90 that suddenly stopped turning on—no crank or anything. When I scan the car, the ABS module (VDDM), ECM, and TCM are all missing from the network. After some digging, I found out that the VDDM acts as a CAN master, and the signal goes to that module first before reaching the ECM and TCM.
My question is: does anyone know if it’s possible to replace this module (VDDM/ABS module) with a used unit and perform a VIDA reload on it? A new one costs around $700, while a low-mileage used one is about $160.
Thanks in advance!
Forum post with similar issue:
https://www.scannerdanner.com/forum/post...ml?start=6
I have a 2017 XC90 that suddenly stopped turning on—no crank or anything. When I scan the car, the ABS module (VDDM), ECM, and TCM are all missing from the network. After some digging, I found out that the VDDM acts as a CAN master, and the signal goes to that module first before reaching the ECM and TCM.
My question is: does anyone know if it’s possible to replace this module (VDDM/ABS module) with a used unit and perform a VIDA reload on it? A new one costs around $700, while a low-mileage used one is about $160.
Thanks in advance!
Forum post with similar issue:
https://www.scannerdanner.com/forum/post...ml?start=6