Sun shade and roof calibration issue

[volver]

On my Volvo S60 2019, I had a feeling that the sunroof was not closing properly. So I tried to do the calibration by using the knob (holding it for 40 secs in position "4") and also by using Orbit's ECM service function to initialize sunroof calibration. Interestingly in neither option, the sunroof did the full cycle which it is supposed to do - like opening fully and closing fully. After 40 seconds of either using a knob or Orbit, there was a noise for 2 seconds which sounded like a motor making sure that the sunroof is fully closed, and that's it.

There are 2 DTCs - sunroof initialisation missing and sun shade initialisation missing. Both cannot be cleared. Also, automatic opening and closing of sunroof/shade therefore do not work.

So - has anybody had such a situation that sunroof calibration cycle does not run properly?