Can't connect to PS2 - previously have

[robobowie]

Where did you find 0.9.96 SW to downgrade? I found the release notes but thats it. I am having the same issue timming out the connecting to the car after is claims it found the car, tried the TCAM reset using the maxdefrost button but that didnt help any.

There is not an issue with v1.0.9. Well I am always open minded but nothing had changed in the connection process anyways. Although Lysgard contact me if you are still using old version and that problem is reproducible, you don't want to keep using old version, it's not going to work forever for you and I am not too proud to fix bugs!

99% of issues connecting is with the car, commonly when it's a new user with a new car, but does happen other times. 

The basic troubleshooting tree for AAOS car is:

• Try the TCAM reset (hold fron defogger button ~20sec, look for SOS button overhead to flash, then let go of the button, TCAM is restarting)
  
• If that doesn't work, try battery reset - disconnect/reconnect 12V battery
  
• If still not working, the TCAM may need to be re-powered, it has a backup battery so to truly re-power it, you have to pull fuse, or disconnect the 12V battery, while you also find and unplug the BuB (backup battery) from the TCAM. Location differs by model, but you can Google and find model specific info in many forums, as the TCAM is well known to have some problems and need this process occasionally.
  

Hi Power6,

I have tried all of your suggested troubleshooting and have still not been able to connect to the car (had the 12v and BuB disconnected for 30 mins). Orbit finds the car but then times out with the gateway. Windows defender firewall is disabled and when I have the VOE plugged in my laptop does show it connected to an unidentified network so I believe that is all working. I have noted that neither an OBD2 reader or Vdash seem to be able to connect with the car either, checked fuse 31 under the glove box and it is in good shape.

I cant seem to find any other options beyond the TCAM reset to be able to reestablish coms, have any ideas? Thanks for your help.