ECU command FAILED when trying to set egress seat offsets

[Idle]

I’m getting the following logs when trying to set the egress seat offsets:

Code:

Sending seat offsets write
ECU command FAILED!
Error Reason: Error setting diag session on the ECU

I’m trying this on a XC40 from 2019, the default value that is shown is 0000. I changed the 245 EASY INGRESS EGRESS to 03 With easy ingress egress retracting.

Same, XC40 2020

But did you manage to get the easy entry/exit to work?

No, I haven't.