ECU command FAILED when trying to set egress seat offsets

ECU command FAILED when trying to set egress seat offsets - Printable Version

+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Misc (https://forums.spaycetech.com/forumdisplay.php?fid=16)
+--- Thread: ECU command FAILED when trying to set egress seat offsets (/showthread.php?tid=673)

ECU command FAILED when trying to set egress seat offsets - hexaust - 11-25-2024

I’m getting the following logs when trying to set the egress seat offsets:

Code:
Sending seat offsets write

ECU command FAILED!

Error Reason: Error setting diag session on the ECU

I’m trying this on a XC40 from 2019, the default value that is shown is 0000. I changed the 245 EASY INGRESS EGRESS to 03 With easy ingress egress retracting.

RE: ECU command FAILED when trying to set egress seat offsets - Idle - 12-06-2024

(11-25-2024, 08:26 PM)hexaust Wrote: I’m getting the following logs when trying to set the egress seat offsets:

Code:
Sending seat offsets write ECU command FAILED! Error Reason: Error setting diag session on the ECU

I’m trying this on a XC40 from 2019, the default value that is shown is 0000. I changed the 245 EASY INGRESS EGRESS to 03 With easy ingress egress retracting.

Same, XC40 2020

RE: ECU command FAILED when trying to set egress seat offsets - bananajoe - 12-06-2024

it worked fine for me to shorten the distance on v60 2020

RE: ECU command FAILED when trying to set egress seat offsets - Dave - 12-08-2024

(12-06-2024, 03:47 PM)bananajoe Wrote: it worked fine for me to shorten the distance on v60 2020

What value did you put to shorten the distance?

RE: ECU command FAILED when trying to set egress seat offsets - bananajoe - 12-09-2024

so, easiest way I found was to use a hex->dec calculator, then divide the default dec value by 2, convert back to hex and enter that value.. did similar with down

RE: ECU command FAILED when trying to set egress seat offsets - hexaust - 12-09-2024

(12-06-2024, 04:10 AM)Idle Wrote:
(11-25-2024, 08:26 PM)hexaust Wrote: I’m getting the following logs when trying to set the egress seat offsets:

Code:
Sending seat offsets write ECU command FAILED! Error Reason: Error setting diag session on the ECU

I’m trying this on a XC40 from 2019, the default value that is shown is 0000. I changed the 245 EASY INGRESS EGRESS to 03 With easy ingress egress retracting.

Same, XC40 2020

But did you manage to get the easy entry/exit to work?

RE: ECU command FAILED when trying to set egress seat offsets - Idle - 01-25-2025

(12-09-2024, 03:42 PM)hexaust Wrote:
(12-06-2024, 04:10 AM)Idle Wrote:
(11-25-2024, 08:26 PM)hexaust Wrote: I’m getting the following logs when trying to set the egress seat offsets:

Code:
Sending seat offsets write ECU command FAILED! Error Reason: Error setting diag session on the ECU

I’m trying this on a XC40 from 2019, the default value that is shown is 0000. I changed the 245 EASY INGRESS EGRESS to 03 With easy ingress egress retracting.

Same, XC40 2020

But did you manage to get the easy entry/exit to work?

No, I haven't. Undecided