Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bliss and CTA
#1
I managed to retrofit Bliss and CTA on my 2019 V60
Parts needed:
Complete mirrors (i don't have PN, but must have bliss led on it)
Rear modules, and brakets. I foud brakets with modules, and fore sure are from V60.  
LH 31455672 + 32227721 + 32254967 and 
RH 31455673 + 32227722 + 32254967
Rear bumper harness 31654287 (in my case with bliss, 6 parking sensors and foot movement sensor)
6 male pins for the body connector (y don't have PN, i already had the pins)
Now the wiring from the body (male connector)
PIN 2 (BU/OG) -12v from fuse no 30 in the trunk (here also require pin - i don't have PN)
PIN 19 (BK/WH) - ground
PIN 17 (WH) - A15 ASDM
PIN 18 (GN) - A5 ASDM
PIN 7 (WH) - A16 ASDM
PIN 8 (GN) - A6 ASDM
ASDM connector already has wires, you can tap it toghether with existing ones
With Orbit i set 
152 : 02 and 153 : 03
I didn't drove the car yet, but i don't have any errors
2019 Volvo V60
Reply


Messages In This Thread
Bliss and CTA - by paunionutz - 08-10-2024, 01:46 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)