Bending Lights and Active High Beam

[paunionutz]

Hello guys. I just swaped my headlights with ABL. Everiting is working, but i notticed 2 problems:
1. I see shadow spots on the road from bouth headlights.  Light is not uniform
2. When i have a car in front, i don't have light in the center, i bearly  see something.
I din't config correct?

It's not the config, you need to realign your headlights after replacing. 
There are two screws on each headlight (up and down) and (right to left).

I already did that, before i test them, on the headlight device at TUV station

Which of these did you choose for 109 ACTIVE HIGH BEAM?:

04 With AHB2 (Adaptive), Low Beam in Village
05 With AHB2 (Adaptive), High Beam in Small Village

We're using setting 04 on both XC90 & XC60 after trying and not liking 05 which had that dark gap when following a car.

I use 05. I'll try 04 to see  how is it. Thanks