How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install)

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install)

nology Offline

Offline

Junior Member

Posts: 1
Threads: 0
Joined: Mar 2024
Reputation: 0

#14

03-22-2024, 07:34 AM

Hi, I replaced headlight and HCM on my 2024 xc40 recharge. The sides (HCML and HCMR) are OK, but as I understand, I have to flash the HCM with the info from the headlight sticker. But how can I get the required .vbf files to perform the flash?
Thanks!

Find

Reply

« Next Oldest | Next Newest »

Messages In This Thread

How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 07-07-2023, 08:54 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by IMAY2023 - 07-10-2023, 11:32 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 07-11-2023, 02:59 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by IMAY2023 - 07-11-2023, 06:31 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Davide - 08-30-2023, 07:34 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 09-06-2023, 02:49 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Davide - 09-06-2023, 03:25 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by R1maS - 12-20-2023, 02:25 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 12-24-2023, 05:08 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by R1maS - 12-28-2023, 06:00 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 01-01-2024, 06:35 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by aleksei_k - 01-23-2024, 10:48 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 01-24-2024, 03:45 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by nology - 03-22-2024, 07:34 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Pavlo - 04-02-2024, 04:09 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by IMAY2023 - 04-03-2024, 12:06 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Pavlo - 04-03-2024, 12:23 PM

How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by benjyman86 - 04-29-2024, 07:40 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by IMAY2023 - 04-29-2024, 09:34 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by AlexXander - 05-06-2024, 07:57 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by IMAY2023 - 05-06-2024, 11:53 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Power6 - 05-09-2024, 01:46 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by hao166 - 05-10-2024, 03:34 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by przemek219 - 08-01-2024, 01:32 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Svoi83 - 08-29-2024, 11:54 AM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by volvo.man - 08-29-2024, 03:28 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Svoi83 - 08-29-2024, 04:06 PM

RE: How to work with headlamps and HCMs in OrBit (flashing, config, used HCM install) - by Marky mark - 10-09-2024, 08:22 PM

View a Printable Version

Users browsing this thread: 4 Guest(s)