02-04-2024, 02:31 PM
(This post was last modified: 02-08-2024, 11:46 AM by volvoxc1245.)
Ok so I have figured out the location and wiring for those who do not have the wiring/connector at the clockspring for the heated steering wheel. The dashboard harness may or may not have the HSWM connector needed to complete the install - you could have to buy one or solder onto the board the wires missing. I haven't checked for mine yet but here is a picture of what the harness looks like so yo you can have a full picture. The HSWM connector is embedded under the drivers floor mat and is a white 6-prong female that is located right before the the harness breaks off to the steering wheel column and other dash components
https://i.ebayimg.com/images/g/ySkAAOSwJ...l1600.webp
Here is another:
https://i.ebayimg.com/images/g/Xq8AAOSwh...l1600.webp
This one is nice and easy to see since there is foam around the connector next to the two ground lines
Here is a close up inside a car that has one:
https://a.d-cd.net/45917d6s-1920.jpg
https://i.ebayimg.com/images/g/ySkAAOSwJ...l1600.webp
Here is another:
https://i.ebayimg.com/images/g/Xq8AAOSwh...l1600.webp
This one is nice and easy to see since there is foam around the connector next to the two ground lines
Here is a close up inside a car that has one:
https://a.d-cd.net/45917d6s-1920.jpg