P2 Pixel activation in N/A

[Starno]

The upgrade went well but I got nervous for a while.

1. As I left work for home I had the could icon but strangely the auto high beam was not on. Could be a coincidence but it was looking like the upgrade already started reverting to OEM. I'll never know.
2. Got home, connected OrBIT, reverted to OEM.
3. Disconnected OrBIT, got in the car... oups no more update cloud or notification in the settings (going from 2.7 to 2.10). Hum...?
4. Did the infotainement reset, still no cloud ?! Then I got nervous that I lost the update or ability to do so.
5. Took the car out of the Garage (Better LTE coverage), did the TCAM reset (defrost method), cloud and notification came back.
6. Performed the update (60+ min.)
7. Reconnected OrBIT, reloaded last settings.
8. Test drive = all good at 2.10 with Pixel working.

So my question, was it normal that I initially lost the update?

Thanks!

So my car did the same thing with the update where I had it when i parked at the office and to avoid to possibility of being stranded at the office, I waited till i got home.
When i got home the update disappeared... although for me just resetting the infotainment unit brought it back.
That was before I bought orbit applying 2.10.

Thanks, good to know. For some reason my car skipped 2.9, maybe for that reason, I did not reset the infotainement or TCAM in a while. I'll do it more frequently as I see others getting OTA updates.

Happy to see that it is not Orbit related although I would not see any correlation.

---

No issues really -- programming the car with OrBit is a relatively safe operation (the software runs a lot of checks before actually programming). You can poke around the forums here / SwedeSpeed to understand the details.
The only thing to really keep in mind is to "Restore to OEM" configuration before going to a dealer (there's a button in OrBit); Volvo currently does not block cars programmed with OrBit, but best to restore just to be safe.

Hello,

I wanted to drop a quick note to let you know that I recently installed and used Orbit over the weekend. I must say, the entire process went incredibly smoothly and was surprisingly easy. It was like magic seeing everything work flawlessly, and now I can finally enjoy the Pixel  lights just as they were intended to be.

I consistently run on High beam (Type B) and to my pleasant surprise, I didn't get flashed by other drivers even once.

I do have to mention that the most challenging and confusing part for me was the Diagnostic test in Vida, but that's a whole different story.

I'd like to express my gratitude to everyone who assisted me throughout this journey. Thank you all for your support!

Hello A-P, I'd like to understand something better. I recently activated pixel headlights (AHB3) using orbit (per recommendations in this forums, 106 set to value 12 (Type B) and 109 set to 06 AHB3. The active pixel functionality works, but it is very shy: it only turns on occasionally, and quickly turns off if there are lights, road signs, anything really. So although it seems to work beautifully, it rarely turns on.

Question: when you say you run on High beam (Type B), do you actually force high beam on, or do you let the auto high beam functionality turn it on when it judges that it is appropriate?

Corollary: can anyone suggest a (better) setting (than 106/12 and 109/06) that maximizes the use of the active pixel headlights?

If you "force" the High Beam, you'll loose the adaptive function. From what I remember from night drive reviews, this was one of the complains from that. It takes to long to activate but it does stay on a lot. Not that shy

Ok thanks! That's really too bad, I wish we could just turn on high beam and leave it at that. I'll have to test it more, but from what I've seen, it does not stay on for long. Glad some users got it to work well, though, gives me some hope!

Hey,

Maybe I don't get the concept of adaptive high beam but driving at night again last night makes me thinking that we are not loosing that feature.

When I turned on the car the Autohigh icon was there. Downtown, the car stayed on low beam all the time. Getting on secondary roads, "Pixel" highbeam turned on, I followed a few cars and crossed a couple. Could clearly see the black spots moving, I was not flashed or brake checked once.

Then went back downtown on the same trip and the lights turned back to low.

By the way even if would have been flashed once I would not panic. It happened to me a few times on low beam already. 

Again, no intervention on my end, all automatic and just amazed and impressed of the performance of the light system.