Enabling Pilot Assist and Adaptive Cruise Control

[IMAY2023]

Is it possible to make the assistance pilot work at a higher speed because at 140 km/h the steering wheel goes out and works like cruise control?

no

[paris]

This is awesome. Just activated ACC.  easiest thing ever
2023 XC60

[Apansson]

Is it possible to make the ACC adjust speed by road signs automatically?

[IMAY2023]

Is it possible to make the ACC adjust speed by road signs automatically?

no; but you can enable speed limiter based on road signs. 
036 ADJUSTABLE SPEED LIMITER > 03
149 ROAD SIGN INFORMATION > 0F for USA. If you are in other region, just make sure to select with the one "With speed limit adaptation (SLA)"

[hyfwangsta]

We just picked up a 2024 XC40 plus and was unpleasantly surprised that adaptive cruise control was not available. 

I am looking into purchasing Orbit, but want to make sure it will be able to enable PA/ACC on a 2024 xc40. 

Has anyone tried it? Did you have any issues?

Thank you!!

[kraeburn]

I just did that to my wife's new XC40 B5 plus.

No issues, functions fine.  Use the standard settings.  Have had it up and running for about a week now.

[hyfwangsta]

I just did that to my wife's new XC40 B5 plus.

No issues, functions fine.  Use the standard settings.  Have had it up and running for about a week now.

Thanks! now I just need to find a windows laptop...

[hyfwangsta]

I enabled ACC/PA today on my 2024 XC40. But afterwards when i run codes it keeps showing the following even after i clear codes they still come back. What are these? 

HCML:
B167F - **No description found in ECU database**

HCMR:
B167F - **No description found in ECU database**

PSCM:
U112B - Interrupted Communication with Central Electronic Module (CEM)- Bus Signal / Message Failures- Missing message

[IMAY2023]

I enabled ACC/PA today on my 2024 XC40. But afterwards when i run codes it keeps showing the following even after i clear codes they still come back. What are these? 

HCML:
B167F - **No description found in ECU database**

HCMR:
B167F - **No description found in ECU database**

PSCM:
U112B - Interrupted Communication with Central Electronic Module (CEM)- Bus Signal / Message Failures- Missing message

First to codes are from head light units (L & R) 
The last one is from the the power steering control module.  
If you revert the (ACC/PA) changes back, do those DTCs come back or not?

[hyfwangsta]

I enabled ACC/PA today on my 2024 XC40. But afterwards when i run codes it keeps showing the following even after i clear codes they still come back. What are these? 

HCML:
B167F - **No description found in ECU database**

HCMR:
B167F - **No description found in ECU database**

PSCM:
U112B - Interrupted Communication with Central Electronic Module (CEM)- Bus Signal / Message Failures- Missing message

First to codes are from head light units (L & R) 
The last one is from the the power steering control module.  
If you revert the (ACC/PA) changes back, do those DTCs come back or not?

I haven’t tried that. Will try it and report back. 

If they don’t come back does that mean I shouldn’t enable acc/pa?