Key coding

[TweakeNL]

Just a small note: Apparently there is a new rule in the EU that you are only allowed to program new keys when having certificates. (https://www.vehiclesermi.eu/)

So if you are in the EU and you have VIDA as an independent workshop it may be a problem.

[R1maS]

Just a small note: Apparently there is a new rule in the EU that you are only allowed to program new keys when having certificates. (https://www.vehiclesermi.eu/)

So if you are in the EU and you have VIDA as an independent workshop it may be a problem.

Till day before yesterday everything was working. EU, independent workshop.

[Swer]

Hi. Maybe someone can help me to solve the problem? I have used key from another car, then i try programming him to the car (xc60 2019my), i put key in cup holder, battery new, Orbit say Key not found, and then i read DTC, i receive error CEM: Key system programming failures-system programming failures, what am i doing wrong? Orbit version newest, pin 11 generated/saved. I read the forum, and didn't find an answer. Thank you very much for help.

[Amphicar770]

Question.   I ordered a used Volvo key fob, the one with buttons.

Tried adding it to my 2022 Polestar.   OrBit retrieved the PIN,  but says key not found (in cupholder).

I did notice it states that it can program "passive key fob".  Does that mean the one without buttons?

Possible that I got a bad fob, I did put a new battery in it.  Not sure how likely that is?

Thanks.

[Swer]

Is there a solution to the problem?

[krienks]

Hi. Maybe someone can help me to solve the problem? I have used key from another car, then i try programming him to the car (xc60 2019my), i put key in cup holder, battery new, Orbit say Key not found, and then i read DTC, i receive error CEM: Key system programming failures-system programming failures, what am i doing wrong? Orbit version newest, pin 11 generated/saved. I read the forum, and didn't find an answer. Thank you very much for help.

I had the same problem, 'key not found' and 'programming failure', also in a XC60 MY2019. I was able to program the keys in the end by changing the position of the key in the cupholder. Try a few different positions, worked for me.

[paska]

Is there a solution to the problem?

Hi try to put the Volvo loggo point outside in the cupholder you should see the loggo when its placed there.
Worked for me.

[Swer]

thanks guys i will try it

[paska]

thanks guys i will try it

Hi here is some pictures how it should be done.        

[whor22]

Last week I tried to program a new key. I have two used keys. but the Orbit 11level code could not be calculated, and programming the key is not possible. I tried three times, same result

Pin Extract failed
Error Reason: Error getting data from the CEM

XC40 2018 D4 AWD R-Design
p.s. is there any hope for a solution? I really hoped that this would work in my car. I really need this option. Now I'm upset