Hitch retrofit

[OrangePower]

You need OrBit

1- to flash the module if it was not a used module already flashed
2- to enable the towing setting in the car

Sent from my Pixel 7 Pro using Tapatalk

Thank you for advice, I just proceed with order of Orbit with PIN number.

[OrangePower]

Orbit is working, what I must do next to flush TRM module and which setting I must enable?

[BeachBoy]

Orbit is working, what I must do next to flush TRM module and which setting I must enable?

I believe this part is not yet mainstream, please email support@spaycetech.com and @Power6 will let you know how to load the TRM module

After you just change the orbit setting (and back to OEM for dealer visits)

Sent from my Pixel 7 Pro using Tapatalk

[OrangePower]

Orbit is working, what I must do next to flush TRM module and which setting I must enable?

I believe this part is not yet mainstream, please email support@spaycetech.com and @Power6 will let you know how to load the TRM module

After you just change the orbit setting (and back to OEM for dealer visits)

Sent from my Pixel 7 Pro using Tapatalk

Hi
We allready sorted all things. TRM is programed and hitch is working. 

[BeachBoy]

Orbit is working, what I must do next to flush TRM module and which setting I must enable?

I believe this part is not yet mainstream, please email support@spaycetech.com and @Power6 will let you know how to load the TRM module

After you just change the orbit setting (and back to OEM for dealer visits)

Sent from my Pixel 7 Pro using Tapatalk

Hi
We allready sorted all things. TRM is programed and hitch is working. 

Welcome to the aftermarket hitch group heheh

Sent from my Pixel 7 Pro using Tapatalk

[Megailo]

Hello, I have read your various posts on the installation of the towing kit.
I would like to buy everything used, including the box which was already installed on another vehicle.
For those who have succeeded, It is possible to make a small tutorial concerning the programming of the box because here in Europe I do not have Vida and I would especially not want to spend my money on something that will not work not.

[Pliind]

May i ask what orbit setting people are using when retrofitting the original foldable towbar? 

There are two options on setting 211 throwing me off 13pos or 4/7pos? 

Im in Sweden if its region specific setting on the power out.

EDIT: it was 13pol

[BeachBoy]

May i ask what orbit setting people are using when retrofitting the original foldable towbar? 

There are two options on setting 211 throwing me off 13pos or 4/7pos? 

Im in Sweden if its region specific setting on the power out.

The 13 pins plugs is a round one with 13 pins (duh!)
The 4/7 is the small round (7 pins) or flat (4 pins)

[Pliind]

May i ask what orbit setting people are using when retrofitting the original foldable towbar? 

There are two options on setting 211 throwing me off 13pos or 4/7pos? 

Im in Sweden if its region specific setting on the power out.

The 13 pins plugs is a round one with 13 pins (duh!)
The 4/7 is the small round (7 pins) or flat (4 pins)

Sounds good. Thanks ill have a look