09-18-2024, 08:57 AM
(This post was last modified: 09-18-2024, 09:04 AM by Aliaksandr.)
Rear door connector.
![[Image: 2024-09-18-114943-2.png]](https://i.postimg.cc/bZw1qd7T/2024-09-18-114943-2.png)
I have completed the installation. I bought and painted 4 handles. I bought 3 antennas. I bought 90 meters of 0.25 wire. I did the wiring of the rear doors. These are 2 wires for the antennas, 1 for the handle and 2 wires for power supply of the hand inside the door. I did the wiring of the front doors. Wires for the handle. 2 wires for the antenna in the back. I connected all this to the CEM. There was a problem with the contact of the right antenna and CEM. After eliminating it, everything works. Thanks everyone.
I have completed the installation. I bought and painted 4 handles. I bought 3 antennas. I bought 90 meters of 0.25 wire. I did the wiring of the rear doors. These are 2 wires for the antennas, 1 for the handle and 2 wires for power supply of the hand inside the door. I did the wiring of the front doors. Wires for the handle. 2 wires for the antenna in the back. I connected all this to the CEM. There was a problem with the contact of the right antenna and CEM. After eliminating it, everything works. Thanks everyone.