Troubleshooting failed speaker - B/W

[Percy]

Hi!

The XC60. has roof speakers and i have retrofitted all the wiring including the roof speakers.

I will try coding 14 speakers next time..

[IMAY2023]

I will try coding 14 speakers next time..

This will not work. It's a legacy config. 
The roof speakers go to the middle connector.  If you installed B&W AUD, you should choose Premium Audio and that's it.

[Percy]

I will try coding 14 speakers next time..

This will not work. It's a legacy config. 
The roof speakers go to the middle connector.  If you installed B&W AUD, you should choose Premium Audio and that's it.

Ok. Thanks for answer. I will make a second check on the connectors instead.

Best regards

[Percy]

I will try coding 14 speakers next time..

This will not work. It's a legacy config. 
The roof speakers go to the middle connector.  If you installed B&W AUD, you should choose Premium Audio and that's it.

Ok. Thanks for answer. I will make a second check on the connectors instead.

Best regards

Hi again, You were absolutely right, i had turned the connector upside down while putting in the pins, so when i moved to the pins to the right location everything works perfect.
Thanks