360 Camera Defaulting

[IMAY2023]

I know this forum isn't related to vida at all, but if someone is able to provide me with an answer, that would be great.

Can things such as this 360 camera default be enabled with vida or is my best bet to get my pin codes I need through vida and just use OrBit?

I like the idea of using vida as it's the official software and I can just edit what I want and leave it without worrying about the dealer seeing it and voiding warranty, etc.

Thanks!

Simple Answer, No. VIDA will only install the original equipment codded to VIN from factory plus the  accessories which are made available for specific model / year by VOLVO.  
I also though retrofitting 360 CAM. I have all the wiring and required parts. But the parts aside, job is pain in the b* and i would not be able to calibrate it because VIDA would not allow it to be installed nor configured.

[BeachBoy]

Configured yes with OrBit

Calibrated Power6would have to see what is sent to the car when starting it, I'm quite sure he can wireshark it and replicate in OrBit...

When you calibrate it only sends a command and then you drive then car in certain conditions.

[IMAY2023]

Yes, you are correct. The traffic can be recorded and the procedure can be replicated in OrBit. until then cannot be done. 
I don't know if the PAC (Parking Aid Control Module.) has VIN coded in though.

[4Wheels]

Hello everyone,

For anyone (like me) who prefers the 360 view by default, the following setting gives you a FULL SCREEN 360 view by default, which in my opinion is awesome:

0B Parking Camera 360, GEN 2

Front, back, and lateral facing cameras are available via screen press. This configuration worked for me on a MY23 XC40 Recharge.