(04-24-2024, 08:27 PM)IMAY2023 Wrote: If you want to hear the engine sound, you need to set it to eoe only.
After configuration is done, Orbit resets the ECUs but sometimes after some configs, restarting specific ECUs again is required. Or leaving the car locked for a period of time.
So, change the setting to EOE and
reset > ECM, AUD, IHU and CEM
My original settings was EOE (s60 T5), It sounded like fake turbo boost at low rpms. I like quite driving experience. So, I put it to EOR. I do not hear any humming noise with my retrofitted B&W AUD and it is really quite in the cabin.
Thank you for this!! I set it to EOR on my XC90 T6 with B&W and prefer the driving experience now - I didn't realize fake "enhancements" were so noticeable and unpleasant. It even makes Polestar mode more fun since it's quiet but now sounds authentic and still fast
___________________________________
2019 XC90 T6 R-Design
2020 XC60 T5 Momentum
Bright Silver Metal
Advanced, HK, Multimedia, Premium, Heated Steering Wheel, 20s
2019 XC90 T6 R-Design
Passion Red
4C, Advanced, B&W, CF Inlays, Heated Steering Wheel/Rear, Polestar, 20s2020 XC60 T5 Momentum
Bright Silver Metal
Advanced, HK, Multimedia, Premium, Heated Steering Wheel, 20s
