Hi - I'm using OrBit with a Polestar 2 on the very latest version of its OTA software (5.1.17, which doesn't even appear on the manufacturer's software info page yet -- though it deployed OTA to the car two weeks ago). Shortly after that update, I was able to connect with OrBit and push some headlight configuration changes to the car. Today, though, I tried again as I wanted to change the version of adaptive that I had chosen. I was able to connect and get basic car info (e.g., battery SOH, 12V charge, and current config), but when I tried to push a change to the car I got a "VGM PIN incorrect" error repeatedly, and could not progress. I verified that OrBit is still set up with the same PINs as I had initially put in for the VIN. Anybody know what could be going wrong and anything I could do to fix it?
<UPDATE> I had been running OrBit continuously on the ancient laptop I use for this sole purpose. Closing the app and reopening it triggered a software update check. After installing the latest version of OrBit, everything worked.
<UPDATE> I had been running OrBit continuously on the ancient laptop I use for this sole purpose. Closing the app and reopening it triggered a software update check. After installing the latest version of OrBit, everything worked.